Language:
switch to room list switch to menu My folders
Go to page: First ... 8 9 10 11 [12] 13 14 15 16 ... Last
[#] Tue Dec 29 2020 10:11:02 EST from IGnatius T Foobar

Subject: Re: Citadel server and Openmediavault on the same debian machine.

[Reply] [ReplyQuoted] [Headers] [Print]

Yes ... ditch the packages and deploy Citadel using Easy Install instead.
As a bonus you'll get a much newer version.

[#] Wed Dec 30 2020 05:49:30 EST from tabbi

Subject: citadel on a raspi 4 64bit?

[Reply] [ReplyQuoted] [Headers] [Print]

Hallo,

 

I want to use a Raspi 4 8GB with Raspian as an Citadel-Server.

I need a configuration as on my raspi 3 with fetchmail, citadel and postfix.

The original debian package installs as a citadel-MTA and kills postfix. So I tried to install with easyinstall, but the Result is not right:

I need help!

 

Installing libcitadel...
checking build system type... conftools/config.guess: unable to guess system type

This script, last modified 2006-07-02, has failed to recognize
the operating system you are using. It is advised that you
download the most up to date version of the config scripts from

  http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess
and
  http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub

If the version you run (conftools/config.guess) is already up to date, please
send the following data and any information you think might be
pertinent to <config-patches@gnu.org> in order to provide the needed
information to handle your system.

config.guess timestamp = 2006-07-02

uname -m = aarch64
uname -r = 5.4.79-v8+
uname -s = Linux
uname -v = #1373 SMP PREEMPT Mon Nov 23 13:32:41 GMT 2020

/usr/bin/uname -p =
/bin/uname -X     =

hostinfo               =
/bin/universe          =
/usr/bin/arch -k       =
/bin/arch              =
/usr/bin/oslevel       =
/usr/convex/getsysinfo =

UNAME_MACHINE = aarch64
UNAME_RELEASE = 5.4.79-v8+
UNAME_SYSTEM  = Linux
UNAME_VERSION = #1373 SMP PREEMPT Mon Nov 23 13:32:41 GMT 2020
configure: error: cannot guess build type; you must specify one
 Citadel Easy Install is aborting.
 The last few lines above this message may indicate what went wrong.
 Linux Debian 10.7( 5.4.79-v8+ aarch64)

 

tabbi



[#] Wed Dec 30 2020 10:23:01 EST from ParanoidDelusions

Subject: Re: citadel on a raspi 4 64bit?

[Reply] [ReplyQuoted] [Headers] [Print]

There are instructions on my Citadel, wallofhate.com on how to install Citadel on a Pi 3B+.

I can't help you with fetchmail and postfix and if there may be library conflicts with that part of it - but I'd think getting Citadel installed and running first might be the best first step toward achieving what you want.

 

Wed Dec 30 2020 05:49:30 EST from tabbi Subject: citadel on a raspi 4 64bit?

Hallo,

 

I want to use a Raspi 4 8GB with Raspian as an Citadel-Server.

I need a configuration as on my raspi 3 with fetchmail, citadel and postfix.



[#] Wed Dec 30 2020 10:24:13 EST from ParanoidDelusions

Subject: Re: citadel on a raspi 4 64bit?

[Reply] [ReplyQuoted] [Headers] [Print]

I would absolutely NOT recommend using the distro packages. I had no luck with that route. Easy Install is always the way to go - the distros aren't well enough maintained to use the apt packages to install a correctly working instance of Citadel - especially on Raspbian.



[#] Wed Dec 30 2020 11:24:04 EST from Nurb432

Subject: Re: citadel on a raspi 4 64bit?

[Reply] [ReplyQuoted] [Headers] [Print]

Another vote for this, from a nobody.   Packages are always behind current, and can create other havoc in the system.

Wed Dec 30 2020 10:24:13 EST from ParanoidDelusions Subject: Re: citadel on a raspi 4 64bit?

I would absolutely NOT recommend using the distro packages. I had no luck with that route. Easy Install is always the way to go - the distros aren't well enough maintained to use the apt packages to install a correctly working instance of Citadel - especially on Raspbian.



 



[#] Wed Dec 30 2020 17:07:36 EST from arvindikc

Subject: How to create multi server setup for Citadel

[Reply] [ReplyQuoted] [Headers] [Print]

Hi

 

Is there any guide/howto explaining multi server setup of CITADEL?

Arvind.

 



[#] Fri Jan 01 2021 09:32:09 EST from markus

Subject: Re: Citadel server and Openmediavault on the same debian machine.

[Reply] [ReplyQuoted] [Headers] [Print]

 

Tue Dec 29 2020 10:11:02 EST from IGnatius T Foobar Subject: Re: Citadel server and Openmediavault on the same debian machine.
Yes ... ditch the packages and deploy Citadel using Easy Install instead.
As a bonus you'll get a much newer version.

I tried to install Citadel by using Easy Install.

1) First with "curl http://easyinstall.citadel.org/install | bash". The installtion process stopped with the following info:

    % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
    100   185  100   185    0     0    429      0 --:--:-- --:--:-- --:--:--   429
    bash: line 1: html: No such file or directory
    bash: line 2: syntax error near unexpected token `<'
   'ash: line 2: `<head><title>301 Moved Permanently</title></head>

2) Then I tried the other option "wget -q -O - http://easyinstall.citadel.org/install | bash". It runs for a while well until it fails with:

    Installing libcitadel...
    checking build system type... conftools/config.guess: unable to guess system type

    This script, last modified 2006-07-02, has failed to recognize
    the operating system you are using. It is advised that you
    download the most up to date version of the config scripts from

    http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess
    and
    http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub

    If the version you run (conftools/config.guess) is already up to date, please
    send the following data and any information you think might be
    pertinent to <config-patches@gnu.org> in order to provide the needed
    information to handle your system.

    config.guess timestamp = 2006-07-02

    uname -m = aarch64
    uname -r = 5.9.14-rockchip64
    uname -s = Linux
    uname -v = #20.11.4 SMP PREEMPT Tue Dec 15 08:52:20 CET 2020

    /usr/bin/uname -p = unknown
    /bin/uname -X     =

    hostinfo               =
    /bin/universe          =
    /usr/bin/arch -k       =
    /bin/arch              = aarch64
    /usr/bin/oslevel       =
    /usr/convex/getsysinfo =

    UNAME_MACHINE = aarch64
    UNAME_RELEASE = 5.9.14-rockchip64
    UNAME_SYSTEM  = Linux
    UNAME_VERSION = #20.11.4 SMP PREEMPT Tue Dec 15 08:52:20 CET 2020
    configure: error: cannot guess build type; you must specify one
    Citadel Easy Install is aborting.
    The last few lines above this message may indicate what went wrong.
    Linux Debian 10.7( 5.9.14-rockchip64 aarch64)

2.1) Follow the advice, I have downloaded a new "config.guess" and "config.sub from the mentioned URLs. I used them instead of mine that came from the distribution and run again "wget -q -O - http://easyinstall.citadel.org/install | bash".  But no luck, the problem persists and 'I got the same output as during the last run.

Do you have any idea? Thanks in advance!

Markus



[#] Fri Jan 01 2021 11:07:06 EST from warbaby

Subject: Re: Citadel server and Openmediavault on the same debian machine.

[Reply] [ReplyQuoted] [Headers] [Print]

Try:

wget https://easyinstall.citadel.org/install -O easyinstall.sh

chmod +x easyinstall.sh

./easyinstall.sh

 A change was already pushed to the website, but the updater is apparently not running.

For the record, I personally will never pipe unknown input directly to a privileged shell. 

Always take a look at what you're running. Download, head, cat, whatever..

That gnu error btw, is not coming directly from easyinstall..

 

Fri Jan 01 2021 09:32:09 AM EST from markus Subject: Re: Citadel server and Openmediavault on the same debian machine.

 

Tue Dec 29 2020 10:11:02 EST from IGnatius T Foobar Subject: Re: Citadel server and Openmediavault on the same debian machine.
Yes ... ditch the packages and deploy Citadel using Easy Install instead.
As a bonus you'll get a much newer version.

I tried to install Citadel by using Easy Install.

1) First with "curl http://easyinstall.citadel.org/install | bash". The installtion process stopped with the following info:

    % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
    100   185  100   185    0     0    429      0 --:--:-- --:--:-- --:--:--   429
    bash: line 1: html: No such file or directory
    bash: line 2: syntax error near unexpected token `<'
   'ash: line 2: `<head><title>301 Moved Permanently</title></head>

2) Then I tried the other option "wget -q -O - http://easyinstall.citadel.org/install | bash". It runs for a while well until it fails with:

    Installing libcitadel...
    checking build system type... conftools/config.guess: unable to guess system type

    This script, last modified 2006-07-02, has failed to recognize
    the operating system you are using. It is advised that you
    download the most up to date version of the config scripts from

    http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess
    and
    http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub

    If the version you run (conftools/config.guess) is already up to date, please
    send the following data and any information you think might be
    pertinent to <config-patches@gnu.org> in order to provide the needed
    information to handle your system.

    config.guess timestamp = 2006-07-02

    uname -m = aarch64
    uname -r = 5.9.14-rockchip64
    uname -s = Linux
    uname -v = #20.11.4 SMP PREEMPT Tue Dec 15 08:52:20 CET 2020

    /usr/bin/uname -p = unknown
    /bin/uname -X     =

    hostinfo               =
    /bin/universe          =
    /usr/bin/arch -k       =
    /bin/arch              = aarch64
    /usr/bin/oslevel       =
    /usr/convex/getsysinfo =

    UNAME_MACHINE = aarch64
    UNAME_RELEASE = 5.9.14-rockchip64
    UNAME_SYSTEM  = Linux
    UNAME_VERSION = #20.11.4 SMP PREEMPT Tue Dec 15 08:52:20 CET 2020
    configure: error: cannot guess build type; you must specify one
    Citadel Easy Install is aborting.
    The last few lines above this message may indicate what went wrong.
    Linux Debian 10.7( 5.9.14-rockchip64 aarch64)

2.1) Follow the advice, I have downloaded a new "config.guess" and "config.sub from the mentioned URLs. I used them instead of mine that came from the distribution and run again "wget -q -O - http://easyinstall.citadel.org/install | bash".  But no luck, the problem persists and 'I got the same output as during the last run.

Do you have any idea? Thanks in advance!

Markus



 



[#] Fri Jan 01 2021 13:47:36 EST from wesleyallison

Subject: help setting up

[Reply] [ReplyQuoted] [Headers] [Print]

I would like to know if anyone has a full tutorial? including the domain with No IP.



[#] Fri Jan 01 2021 13:58:28 EST from ParanoidDelusions

Subject: Re: help setting up

[Reply] [ReplyQuoted] [Headers] [Print]

I've got a full update on installing on Raspbian on a Pi at my Citadel - wallofhate.com

But it will fail on a curl or wget for the same reason listed above - you've got to use HTTPS: in the URL you give curl or wget now. the HTTP URL will download the file locally, and you have to execute the script there using SU or sudo to get it to work.

Fri Jan 01 2021 13:47:36 EST from wesleyallison Subject: help setting up

I would like to know if anyone has a full tutorial? including the domain with No IP.



 



[#] Fri Jan 01 2021 19:13:29 EST from markus

Subject: Re: Citadel server and Openmediavault on the same debian machine.

[Reply] [ReplyQuoted] [Headers] [Print]

Thanks for your reply!

Accoring to the error output it is "config.guess" that cannot recognize my operating system. I found that "config.guess" (and "config.sub") are both contained by "libcitadel-easyinstall.tar.gz" (in the directory "conftools") which the script https://easyinstall.citadel.org/install downloads from https://easyinstall.citadel.org/. And these files seemed to be old. When I open "config.guess" and "config.sub" I can see the timestamp variable is set to "2006-07-02" and "2006-09-20", respectively. Could be that theses files are to old to recognize my operating system.

So I tried to get newer once following the URLs bellow which I took from the error output of "config.guess":
http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess and
http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub
But the once I got where from 2008 which are still quite old.

Finally, I have talked to people listening to config-patches@gnu.org and I got the following URLs:
https://git.savannah.gnu.org/cgit/config.git/plain/config.guess
https://git.savannah.gnu.org/cgit/config.git/plain/config.sub
These URLs provide quite actual versions of "config.guess" and "config.sub" dated to 2020-12-22.

Could you please check if these newer files from 2020 can replace the once from 2006? Thanks in advance.

Markus

 

Fri Jan 01 2021 11:07:06 EST from warbaby Subject: Re: Citadel server and Openmediavault on the same debian machine.

Try:

wget https://easyinstall.citadel.org/install -O easyinstall.sh

chmod +x easyinstall.sh

./easyinstall.sh

 A change was already pushed to the website, but the updater is apparently not running.

For the record, I personally will never pipe unknown input directly to a privileged shell. 

Always take a look at what you're running. Download, head, cat, whatever..

That gnu error btw, is not coming directly from easyinstall..

 

Fri Jan 01 2021 09:32:09 AM EST from markus Subject: Re: Citadel server and Openmediavault on the same debian machine.

 

Tue Dec 29 2020 10:11:02 EST from IGnatius T Foobar Subject: Re: Citadel server and Openmediavault on the same debian machine.
Yes ... ditch the packages and deploy Citadel using Easy Install instead.
As a bonus you'll get a much newer version.

I tried to install Citadel by using Easy Install.

1) First with "curl http://easyinstall.citadel.org/install | bash". The installtion process stopped with the following info:

    % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
    100   185  100   185    0     0    429      0 --:--:-- --:--:-- --:--:--   429
    bash: line 1: html: No such file or directory
    bash: line 2: syntax error near unexpected token `<'
   'ash: line 2: `<head><title>301 Moved Permanently</title></head>

2) Then I tried the other option "wget -q -O - http://easyinstall.citadel.org/install | bash". It runs for a while well until it fails with:

    Installing libcitadel...
    checking build system type... conftools/config.guess: unable to guess system type

    This script, last modified 2006-07-02, has failed to recognize
    the operating system you are using. It is advised that you
    download the most up to date version of the config scripts from

    http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess
    and
    http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub

    If the version you run (conftools/config.guess) is already up to date, please
    send the following data and any information you think might be
    pertinent to <config-patches@gnu.org> in order to provide the needed
    information to handle your system.

    config.guess timestamp = 2006-07-02

    uname -m = aarch64
    uname -r = 5.9.14-rockchip64
    uname -s = Linux
    uname -v = #20.11.4 SMP PREEMPT Tue Dec 15 08:52:20 CET 2020

    /usr/bin/uname -p = unknown
    /bin/uname -X     =

    hostinfo               =
    /bin/universe          =
    /usr/bin/arch -k       =
    /bin/arch              = aarch64
    /usr/bin/oslevel       =
    /usr/convex/getsysinfo =

    UNAME_MACHINE = aarch64
    UNAME_RELEASE = 5.9.14-rockchip64
    UNAME_SYSTEM  = Linux
    UNAME_VERSION = #20.11.4 SMP PREEMPT Tue Dec 15 08:52:20 CET 2020
    configure: error: cannot guess build type; you must specify one
    Citadel Easy Install is aborting.
    The last few lines above this message may indicate what went wrong.
    Linux Debian 10.7( 5.9.14-rockchip64 aarch64)

2.1) Follow the advice, I have downloaded a new "config.guess" and "config.sub from the mentioned URLs. I used them instead of mine that came from the distribution and run again "wget -q -O - http://easyinstall.citadel.org/install | bash".  But no luck, the problem persists and 'I got the same output as during the last run.

Do you have any idea? Thanks in advance!

Markus



 



 



[#] Fri Jan 01 2021 19:21:56 EST from Nurb432

Subject: Re: Citadel server and Openmediavault on the same debian machine.

[Reply] [ReplyQuoted] [Headers] [Print]

Not an expert here, but what do you have to lose by trying? Worst case it fails again, it wont eat your system or anything.

 

 

Fri Jan 01 2021 19:13:29 EST from markus Subject: Re: Citadel server and Openmediavault on the same debian machine.

 

Could you please check if these newer files from 2020 can replace the once from 2006? Thanks in advance.

 



[#] Sat Jan 02 2021 01:00:48 EST from hamiltra

Subject: Citadel Ldap support with Debian

[Reply] [ReplyQuoted] [Headers] [Print]

Hello Support,

I'm trying to enable Citadel using ldap on a local debian machine. i have installed and configured ldap and have the development libraries installed. when i run easy install and start Citadel, the logs are showing that the server does not have ldap support. no errors in the citadel build. Please advise.



[#] Sat Jan 02 2021 04:58:49 EST from markus

Subject: Re: Citadel server and Openmediavault on the same debian machine.

[Reply] [ReplyQuoted] [Headers] [Print]

Well that's true. And in fact the 2020 version of config.guess and config.sub work for me well in that way that they are able to recognize my operationg system. But I'm not the one who can decide that these versions should be included in libcitadel-easyinstall.tar.gz which is in my opinion necessary that citadel easy install could work for me and maybe others that have never operating systems that could not be recognized by the old version of 2006.

Fri Jan 01 2021 19:21:56 EST from Nurb432 Subject: Re: Citadel server and Openmediavault on the same debian machine.

Not an expert here, but what do you have to lose by trying? Worst case it fails again, it wont eat your system or anything.

 

 

Fri Jan 01 2021 19:13:29 EST from markus Subject: Re: Citadel server and Openmediavault on the same debian machine.

 

Could you please check if these newer files from 2020 can replace the once from 2006? Thanks in advance.

 



 



[#] Sat Jan 02 2021 08:23:41 EST from Nurb432

Subject: Re: Citadel server and Openmediavault on the same debian machine.

[Reply] [ReplyQuoted] [Headers] [Print]

I think there is a dev channel around here, would not hurt to mention it there too.

 

Reason i answered the way i did, is i had a similar issue  ( unrelated software  ) and i just grabbed a copy from something else that did compile on that same machine. I guess going to the 'source' like you did would have made more sense, and i have bookmarked that for next time :) 



[#] Sat Jan 02 2021 09:44:53 EST from hamiltra

Subject: Re: Citadel Ldap support with Debian

[Reply] [ReplyQuoted] [Headers] [Print]

I checked citserver which is linked against 2.4 version of the OpenLDAP library:

libldap_r-2.4.so.2 => /lib/x86_64-linux-gnu/libldap_r-2.4.so.2 (0x00007efe72a42000)

Sat Jan 02 2021 01:00:48 EST from hamiltra Subject: Citadel Ldap support with Debian

Hello Support,

I'm trying to enable Citadel using ldap on a local debian machine. i have installed and configured ldap and have the development libraries installed. when i run easy install and start Citadel, the logs are showing that the server does not have ldap support. no errors in the citadel build. Please advise.



 



[#] Sat Jan 02 2021 12:46:50 EST from hamiltra

Subject: Re: Citadel Ldap support with Debian

[Reply] [ReplyQuoted] [Headers] [Print]

this is the error that I'm seeing in /var/log/syslog:

Jan  2 09:43:20 debian citserver[12952]: Your system is configured for LDAP authentication,

Jan  2 09:43:20 debian citserver[12952]: but you are running a server built without OpenLDAP support.

Jan  2 09:43:20 debian systemd[1]: citadel.service: Main process exited, code=exited, status=107/n/a

 
Sat Jan 02 2021 09:44:53 EST from hamiltra Subject: Re: Citadel Ldap support with Debian

I checked citserver which is linked against 2.4 version of the OpenLDAP library:

libldap_r-2.4.so.2 => /lib/x86_64-linux-gnu/libldap_r-2.4.so.2 (0x00007efe72a42000)

Sat Jan 02 2021 01:00:48 EST from hamiltra Subject: Citadel Ldap support with Debian

Hello Support,

I'm trying to enable Citadel using ldap on a local debian machine. i have installed and configured ldap and have the development libraries installed. when i run easy install and start Citadel, the logs are showing that the server does not have ldap support. no errors in the citadel build. Please advise.



 



 



[#] Sun Jan 03 2021 13:14:44 EST from markus

Subject: Re: Citadel server and Openmediavault on the same debian machine.

[Reply] [ReplyQuoted] [Headers] [Print]

In addition: "config.guess" and "config.sub" should also be replaced in "citadel-easinstall.tar.gz", because the original ones are as old as those in "libcitadel-easyinstall.tar.gz". Much newer are those in "webcit-easyinstall.tar.gz" (from 2014) and they worked well for me. But it is no fault to replace them also by the 2020 version.

Sat Jan 02 2021 04:58:49 EST from markus Subject: Re: Citadel server and Openmediavault on the same debian machine.

Well that's true. And in fact the 2020 version of config.guess and config.sub work for me well in that way that they are able to recognize my operationg system. But I'm not the one who can decide that these versions should be included in libcitadel-easyinstall.tar.gz which is in my opinion necessary that citadel easy install could work for me and maybe others that have never operating systems that could not be recognized by the old version of 2006.

Fri Jan 01 2021 19:21:56 EST from Nurb432 Subject: Re: Citadel server and Openmediavault on the same debian machine.

Not an expert here, but what do you have to lose by trying? Worst case it fails again, it wont eat your system or anything.

 

 

Fri Jan 01 2021 19:13:29 EST from markus Subject: Re: Citadel server and Openmediavault on the same debian machine.

 

Could you please check if these newer files from 2020 can replace the once from 2006? Thanks in advance.

 



 



 



[#] Mon Jan 04 2021 10:36:36 EST from markus

Subject: How to use ctdlmigrate successfully?

[Reply] [ReplyQuoted] [Headers] [Print]

Hello!

Does anybody have experience with "ctdlmigrate"? I gave it a try (from an older citadel server version 824 to the actual 930).  Starting "ctdlmigrate" it seems to export the database from the older system. But obviously there is a problem doing the import to the new system. When "ctdlmigrate" ends no login to the server was possible. After stopping the server it couldn't be restartet.

Any hints are wellcome!

Markus



[#] Mon Jan 04 2021 11:57:42 EST from markus

Subject: Longer keys to communicate to citadel via https

[Reply] [ReplyQuoted] [Headers] [Print]

Hello!

I had to generate a new key file (ending .key), a new certificate signing request file (ending .csr) and a new certificate file (ending .cer) to communicate via https to my citadel server. Accoring to the following howto page

https://www.citadel.org/how_to_install_a_certificate_signed_by_a_recognized_certificate_authority.html

the key length should be "1024". 

I think that was true in former days. Nowadays it seems to be too insecure. Browsers like Firefox and MS Internet Explorer refuse connections to websites that use keys with that length. Would you kindly change your howto page (like for example from "1024" to "4096") to help people generate proper keys or do I have the chance to do it?

Regards

Markus



Go to page: First ... 8 9 10 11 [12] 13 14 15 16 ... Last