Language:
switch to room list switch to menu My folders
Go to page: First ... 24 25 26 27 [28] 29 30 31
[#] Mon Sep 24 2018 22:07:53 EDT from IGnatius T Foobar @ Uncensored

Subject: Re: XMPP server

[Reply] [ReplyQuoted] [Headers] [Print]

If I may ask, what XMPP client(s) were you trying?

Good question. While developing the server I mostly tested with Pidgin, so if ano is testing with something else that will be an interesting thing to find out.

[#] Mon Sep 24 2018 22:08:31 EDT from IGnatius T Foobar @ Uncensored

[Reply] [ReplyQuoted] [Headers] [Print]

Can a catchall account (*@domain.tld) be setup as an alias for a user
account to receive all mail not for a specific user in the domain?

Citadel does not support catchall accounts.

[#] Tue Sep 25 2018 10:52:02 EDT from userT @ Uncensored

Subject: Re: XMPP server

[Reply] [ReplyQuoted] [Headers] [Print]

 

Mon Sep 24 2018 22:07:53 EDT from IGnatius T Foobar @ Uncensored Subject: Re: XMPP server
If I may ask, what XMPP client(s) were you trying?

Good question. While developing the server I mostly tested with Pidgin, so if ano is testing with something else that will be an interesting thing to find out.

I left some notes in the Development room regarding Pidgin and the XMPP server; I'm still trying to analyze whenever I can.
Don't know if you have had chance to check them as well...



[#] Tue Sep 25 2018 11:30:44 EDT from userT @ Uncensored

[Reply] [ReplyQuoted] [Headers] [Print]

 

Mon Sep 24 2018 22:07:02 EDT from IGnatius T Foobar @ Uncensored
Although I meant the lightning and synckolab connectors for
Thunderbird for calendar and address book usage, connectors that are
already long abandoned...

It's pretty clear that we can't count on anything Kolab-related anymore.
There was a lot of (ahem) collaboration between projects at one time, but that eventually went off the rails.

WebCit currently only supports DAV load/save of your entire calendar, which works but is a bit clumsy. Fear not, however: webcit-ng will support CalDAV.
Even in its current state I already have it working with Thunderbird+Lightning (very very frightening). CardDAV is on the roadmap too. Since webcit-ng is fundamentally a REST/DAV platform, implementation of CalDAV and CardDAV features is a lot easier than retro-hacking it into classic WebCit would have been.

So synckolab is dead for good...

So if I understand correctly, Webcit-ng is working with CalDAV on Thunderbird in some "beta" tests with the Lightning addon -even if *very* outdated already-.
But, wouldn't CardDav need an addon or the like as well to work with the address books?
And, if I may ask, why is it being currently very "frightening"?

Do you think there could be plans to support MS Outlook client as well?
Though actually the very few times I use a client is Thunderbird as well, but just in case...

And, well, if I'm deviating too much, think we could move further discussion to the Lobby or Development rooms as well?
Just like the chat module, I'm interested in this new Webcit as well

Thanks



[#] Tue Sep 25 2018 11:32:16 EDT from userT @ Uncensored

[Reply] [ReplyQuoted] [Headers] [Print]

Ouch, and sorry for the many questions, I think I got slightly excited...



[#] Tue Sep 25 2018 11:33:36 EDT from userT @ Uncensored

[Reply] [ReplyQuoted] [Headers] [Print]

NO!! I meant News room above, not Lobby!

Heck, I need to relax and rest for a while...



[#] Tue Sep 25 2018 11:36:02 EDT from winzlo @ Uncensored

[Reply] [ReplyQuoted] [Headers] [Print]

The only way I can see to accomplish the catch-all is to use a hosting service such as GoDaddy to host your e-mail domain traffic, and set up aliases to direct your custom mail in those domains to the FQDN of your Citadel user's e-mail address, using the Catch-all option from within GoDaddy's control panel.
It's not free, so that's one negative behind that.
Having Citadel's SMTP rejection functions first check for a catch-all setting and alternate account would seem possible on its face, but under the hood, I imagine a ton of issues, especially around the message headers that [could] need to be revised [significantly] in order to allow for replies to go back out from said catch-all user.

FWIW, the suggestion I made above is how I handle my e-mail traffic, and it has been working well.

[#] Wed Sep 26 2018 10:30:09 EDT from IGnatius T Foobar @ Uncensored

[Reply] [ReplyQuoted] [Headers] [Print]

So if I understand correctly, Webcit-ng is working with CalDAV on Thunderbird in some "beta" tests with the Lightning addon -even if *very* outdated already-.
But, wouldn't CardDav need an addon or the like as well to work with the address books?

CalDAV/CardDAV are the closest we've got to standard protocols, so that's what we're going to implement. If and when better options appear, we'll go with them too. The state of client software is a bit frustrating right now.

 

And, if I may ask, why is it being currently very "frightening"?

If you don't know why thunderbolts and lightning are very very frightening, you may need a cultural refresher... go back to 1975 and a night at the opera...

 

Do you think there could be plans to support MS Outlook client as well?
Though actually the very few times I use a client is Thunderbird as well, but just in case...

There are two possible ways to support Outlook (assuming that Microsoft isn't ever going to add support for the standard protocols) in the future.  One would be to add a Citadel backend to Openchange, which would let Outlook speak the Exchange RPC protocol to Openchange, and from there it would talk to Citadel.  But I'm not sure of the status of that project; the last commit was almost three years ago.

The other possibility is to find a way to speak ActiveSync protocol.  Newer versions of Outlook speak this protocol, as do all Android and iOS mobile devices.  It's a very complicated protocol and they have some patents guarding it, so this is a bit of a challenge.  There is an open source implementation called Z-Push which is based out of Germany and seems promising.  I started writing a Citadel backend for Z-Push some five or six years ago, and eventually stopped because it was a moving target at the time.  If they've stabilized things a bit, this would be a good effort to resume.  However, since Z-Push requires a "real" web server and PHP, it would certainly take the form of an external sync server, and not be part of WebCit itself.



[#] Wed Sep 26 2018 13:40:46 EDT from userT @ Uncensored

[Reply] [ReplyQuoted] [Headers] [Print]

So better just keep sticking to Thunderbird then.

 

Wed Sep 26 2018 10:30:09 EDT from IGnatius T Foobar @ Uncensored
 
And, if I may ask, why is it being currently very "frightening"?

If you don't know why thunderbolts and lightning are very very frightening, you may need a cultural refresher... go back to 1975 and a night at the opera...

 

Ah, so it was that... I really thought you meant a development ordeal, instead of the literal meaning of "lightning".



[#] Thu Sep 27 2018 03:23:50 EDT from ioio @ Uncensored

Subject: Intermediate certificate

[Reply] [ReplyQuoted] [Headers] [Print]

I'm installing SSL certificate keys to my citadel server and couldn't find a way to install the intermediate certificate. My CA told me, that I must install this certificate. Is there a way with the internal web server to install this key? Or do I have to configure citadel to use Apache, which I don't really want to use?



[#] Thu Sep 27 2018 03:25:41 EDT from ioio @ Uncensored

Subject: Re: Intermediate certificate

[Reply] [ReplyQuoted] [Headers] [Print]

Oops, sorry... I'm in the wrong room... Didn't recognized it on my smartphone...



[#] Thu Sep 27 2018 03:27:17 EDT from ioio @ Uncensored

Subject: Intermediate certificate

[Reply] [ReplyQuoted] [Headers] [Print]

I'm installing SSL certificate keys to my citadel server and couldn't find a way to install the intermediate certificate. My CA told me, that I must install this certificate. Is there a way with the internal web server to install this key? Or do I have to configure citadel to use Apache, which I don't really want to use?



[#] Thu Sep 27 2018 10:08:38 EDT from IGnatius T Foobar @ Uncensored

Subject: Re: Intermediate certificate

[Reply] [ReplyQuoted] [Headers] [Print]

Just append the intermediate certificate to your server certificate.

[#] Fri Sep 28 2018 03:53:56 EDT from palloy @ Uncensored

Subject: installation

[Reply] [ReplyQuoted] [Headers] [Print]

I am setting up my new Orange Pi Prime (ARM) board as a standby for my Citadel mail server, which has been working very well.

The OS is Armbian, based on Debian stretch:

dk@prime:~$ sudo apt install citadel-suite
[sudo] password for dk:
Reading package lists... Done
Building dependency tree      
Reading state information... Done
The following additional packages will be installed:
  citadel-client citadel-server citadel-webcit javascript-common libc-ares2
  libcitadel4 libev4 libical2 libjs-prototype libjs-scriptaculous libmarkdown2
  libsieve2-1 tinymce
Recommended packages:
  db4.6-util
The following NEW packages will be installed:
  citadel-client citadel-server citadel-suite citadel-webcit javascript-common
  libc-ares2 libcitadel4 libev4 libical2 libjs-prototype libjs-scriptaculous
  libmarkdown2 libsieve2-1 tinymce
0 upgraded, 14 newly installed, 0 to remove and 5 not upgraded.
Need to get 2,276 kB of archives.
After this operation, 9,812 kB of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:1 http://security.debian.org stretch/updates/main arm64 libmarkdown2 arm64 2.2.2-1+deb9u1 [29.6 kB]
Get:2 http://cdn-fastly.deb.debian.org/debian stretch/main arm64 javascript-common all 11 [6,120 B]
Get:3 http://cdn-fastly.deb.debian.org/debian stretch/main arm64 libical2 arm64 2.0.0-0.5+b1 [168 kB]
Get:4 http://cdn-fastly.deb.debian.org/debian stretch/main arm64 libjs-prototype all 1.7.1-3 [44.3 kB]
Get:5 http://cdn-fastly.deb.debian.org/debian stretch/main arm64 libjs-scriptaculous all 1.9.0-2 [129 kB]
Get:6 http://cdn-fastly.deb.debian.org/debian stretch/main arm64 libsieve2-1 arm64 2.2.6-1.3 [61.5 kB]
Get:7 http://cdn-fastly.deb.debian.org/debian stretch/main arm64 tinymce all 3.4.8+dfsg0-1 [528 kB]
Get:8 http://cdn-fastly.deb.debian.org/debian stretch/main arm64 libcitadel4 arm64 902-1 [61.7 kB]
Get:9 http://cdn-fastly.deb.debian.org/debian stretch/main arm64 citadel-client arm64 9.01-1+b1 [74.2 kB]
Get:10 http://cdn-fastly.deb.debian.org/debian stretch/main arm64 libc-ares2 arm64 1.12.0-1+deb9u1 [75.9 kB]
Get:11 http://cdn-fastly.deb.debian.org/debian stretch/main arm64 libev4 arm64 1:4.22-1+b1 [34.2 kB]
Get:12 http://cdn-fastly.deb.debian.org/debian stretch/main arm64 citadel-server arm64 902-4 [335 kB]
Get:13 http://cdn-fastly.deb.debian.org/debian stretch/main arm64 citadel-webcit arm64 902-dfsg-4 [721 kB]
Get:14 http://cdn-fastly.deb.debian.org/debian stretch/main arm64 citadel-suite all 902-dfsg-4 [8,202 B]
Fetched 2,276 kB in 6s (329 kB/s)                                             
Preconfiguring packages ...
Selecting previously unselected package javascript-common.
(Reading database ... 73731 files and directories currently installed.)
Preparing to unpack .../00-javascript-common_11_all.deb ...
Unpacking javascript-common (11) ...
Selecting previously unselected package libical2:arm64.
Preparing to unpack .../01-libical2_2.0.0-0.5+b1_arm64.deb ...
Unpacking libical2:arm64 (2.0.0-0.5+b1) ...
Selecting previously unselected package libjs-prototype.
Preparing to unpack .../02-libjs-prototype_1.7.1-3_all.deb ...
Unpacking libjs-prototype (1.7.1-3) ...
Selecting previously unselected package libjs-scriptaculous.
Preparing to unpack .../03-libjs-scriptaculous_1.9.0-2_all.deb ...
Unpacking libjs-scriptaculous (1.9.0-2) ...
Selecting previously unselected package libmarkdown2:arm64.
Preparing to unpack .../04-libmarkdown2_2.2.2-1+deb9u1_arm64.deb ...
Unpacking libmarkdown2:arm64 (2.2.2-1+deb9u1) ...
Selecting previously unselected package libsieve2-1.
Preparing to unpack .../05-libsieve2-1_2.2.6-1.3_arm64.deb ...
Unpacking libsieve2-1 (2.2.6-1.3) ...
Selecting previously unselected package tinymce.
Preparing to unpack .../06-tinymce_3.4.8+dfsg0-1_all.deb ...
Unpacking tinymce (3.4.8+dfsg0-1) ...
Selecting previously unselected package libcitadel4.
Preparing to unpack .../07-libcitadel4_902-1_arm64.deb ...
Unpacking libcitadel4 (902-1) ...
Selecting previously unselected package citadel-client.
Preparing to unpack .../08-citadel-client_9.01-1+b1_arm64.deb ...
Unpacking citadel-client (9.01-1+b1) ...
Selecting previously unselected package libc-ares2:arm64.
Preparing to unpack .../09-libc-ares2_1.12.0-1+deb9u1_arm64.deb ...
Unpacking libc-ares2:arm64 (1.12.0-1+deb9u1) ...
Selecting previously unselected package libev4.
Preparing to unpack .../10-libev4_1%3a4.22-1+b1_arm64.deb ...
Unpacking libev4 (1:4.22-1+b1) ...
Selecting previously unselected package citadel-server.
Preparing to unpack .../11-citadel-server_902-4_arm64.deb ...
Unpacking citadel-server (902-4) ...
Selecting previously unselected package citadel-webcit.
Preparing to unpack .../12-citadel-webcit_902-dfsg-4_arm64.deb ...
Unpacking citadel-webcit (902-dfsg-4) ...
Selecting previously unselected package citadel-suite.
Preparing to unpack .../13-citadel-suite_902-dfsg-4_all.deb ...
Unpacking citadel-suite (902-dfsg-4) ...
Setting up libical2:arm64 (2.0.0-0.5+b1) ...
Setting up libev4 (1:4.22-1+b1) ...
Setting up tinymce (3.4.8+dfsg0-1) ...
Setting up libcitadel4 (902-1) ...
Processing triggers for libc-bin (2.24-11+deb9u3) ...
Processing triggers for systemd (232-25+deb9u4) ...
Processing triggers for man-db (2.7.6.1-2) ...
Setting up libsieve2-1 (2.2.6-1.3) ...
Setting up libmarkdown2:arm64 (2.2.2-1+deb9u1) ...
Setting up javascript-common (11) ...
apache2_invoke: Enable configuration javascript-common
Setting up libjs-prototype (1.7.1-3) ...
Setting up libc-ares2:arm64 (1.12.0-1+deb9u1) ...
Setting up citadel-client (9.01-1+b1) ...
Setting up citadel-server (902-4) ...
Setting up libjs-scriptaculous (1.9.0-2) ...
Setting up citadel-webcit (902-dfsg-4) ...
Setting up citadel-suite (902-dfsg-4) ...
Processing triggers for libc-bin (2.24-11+deb9u3) ...
Processing triggers for systemd (232-25+deb9u4) ...
dk@prime:~$

The firewall's report showed that NO new ports were listening, so I tried:


dk@prime:~$ systemctl status citadel
● citadel.service - LSB: control citadel server start at boot time
   Loaded: loaded (/etc/init.d/citadel; generated; vendor preset: enabled)
   Active: active (running) since Fri 2018-09-28 15:56:30 AEST; 6min ago
     Docs: man:systemd-sysv-generator(8)
    Tasks: 2 (limit: 4915)
   CGroup: /system.slice/citadel.service
           ├─2844 /usr/sbin/citserver -d -x3 -lmail -t/dev/null
           └─4704 /usr/sbin/citserver -d -x3 -lmail -t/dev/null

Sep 28 16:02:48 prime citserver[4704]: bdb(): Setting up DB environment
Sep 28 16:02:48 prime citserver[4704]: dbenv->open(dbenv, /var/lib/citadel/data/
Sep 28 16:02:48 prime citserver[4704]: DB: BDB2526 Finding last valid log LSN: f
Sep 28 16:02:48 prime citserver[4704]: DB: BDB1514 Recovery starting from [79][2
Sep 28 16:02:48 prime citserver[4704]: DB: BDB1518 Recovery complete at Fri Sep
Sep 28 16:02:48 prime citserver[4704]: DB: BDB1519 Maximum transaction ID 800000
Sep 28 16:02:48 prime citserver[4704]: Starting up DB
Sep 28 16:02:48 prime citserver[4704]: Initializing configuration system
Sep 28 16:02:48 prime citserver[4704]: configuration setting c_default_cal_zone is empty, but must not - check your config!
Sep 28 16:02:48 prime citserver[4704]: Checking floor reference counts
lines 1-19/19 (END)
dk@prime:~$

and /var/log/syslog:

Sep 28 16:17:55 prime citserver[10526]: *** Citadel server engine ***
Sep 28 16:17:55 prime citserver[10526]: Version 902 (build 1a4ec92) ***
Sep 28 16:17:55 prime citserver[10526]: Copyright (C) 1987-2016 by the Citadel development team.
Sep 28 16:17:55 prime citserver[10526]: This program is distributed under the terms of the GNU General Public License.
Sep 28 16:17:55 prime citserver[10526]:
Sep 28 16:17:55 prime citserver[10526]: Called as: /usr/sbin/citserver
Sep 28 16:17:55 prime citserver[10526]: libcitadel(unnumbered)
Sep 28 16:17:55 prime citserver[10526]: master_startup() started
Sep 28 16:17:55 prime citserver[10526]: Checking directory access
Sep 28 16:17:55 prime citserver[10526]: Opening databases
Sep 28 16:17:55 prime citserver[10526]: bdb(): open_databases() starting
Sep 28 16:17:55 prime citserver[10526]: Compiled db: Berkeley DB 5.3.28: (September  9, 2013)
Sep 28 16:17:55 prime citserver[10526]:   Linked db: Berkeley DB 5.3.28: (September  9, 2013)
Sep 28 16:17:55 prime citserver[10526]: Linked zlib: 1.2.8
Sep 28 16:17:55 prime citserver[10526]: bdb(): Setting up DB environment
Sep 28 16:17:55 prime citserver[10526]: dbenv->open(dbenv, /var/lib/citadel/data/, 75043, 0)
Sep 28 16:17:55 prime citserver[10526]: DB: BDB2526 Finding last valid log LSN: file: 80 offset 1687301
Sep 28 16:17:55 prime citserver[10526]: DB: BDB1514 Recovery starting from [80][1681863]
Sep 28 16:17:55 prime citserver[10526]: DB: BDB1518 Recovery complete at Fri Sep 28 16:17:55 2018
Sep 28 16:17:55 prime citserver[10526]: DB: BDB1519 Maximum transaction ID 80000024 recovery checkpoint [80][1688463]
Sep 28 16:17:55 prime citserver[10526]: Starting up DB
Sep 28 16:17:55 prime citserver[10526]: Initializing configuration system
Sep 28 16:17:55 prime citserver[10526]: configuration setting c_default_cal_zone is empty, but must not - check your config!
Sep 28 16:17:55 prime citserver[10526]: Checking floor reference counts
Sep 28 16:17:56 prime citserver[10526]: Floor 0: 9 rooms
Sep 28 16:17:56 prime citserver[10526]: Floor 1: 0 rooms
Sep 28 16:17:56 prime citserver[10526]: Floor 2: 0 rooms
Sep 28 16:17:56 prime citserver[10526]: Floor 3: 0 rooms
Sep 28 16:17:56 prime citserver[10526]: Floor 4: 0 rooms
Sep 28 16:17:56 prime citserver[10526]: Floor 5: 0 rooms
Sep 28 16:17:56 prime citserver[10526]: Floor 6: 0 rooms
Sep 28 16:17:56 prime citserver[10526]: Floor 7: 0 rooms
Sep 28 16:17:56 prime citserver[10526]: Floor 8: 0 rooms
Sep 28 16:17:56 prime citserver[10526]: Floor 9: 0 rooms
Sep 28 16:17:56 prime citserver[10526]: Floor 10: 0 rooms
Sep 28 16:17:56 prime citserver[10526]: Floor 11: 0 rooms
Sep 28 16:17:56 prime citserver[10526]: Floor 12: 0 rooms
Sep 28 16:17:56 prime citserver[10526]: Floor 13: 0 rooms
Sep 28 16:17:56 prime citserver[10526]: Floor 14: 0 rooms
Sep 28 16:17:56 prime citserver[10526]: Floor 15: 0 rooms
Sep 28 16:17:56 prime citserver[10526]: Creating base rooms (if necessary)
Sep 28 16:17:56 prime citserver[10526]: Seeding the pseudo-random number generator...
Sep 28 16:17:56 prime citserver[10526]: master_startup() finished
Sep 28 16:17:56 prime citserver[10526]: Sanity checking the recorded highest message, user, and room numbers
Sep 28 16:17:56 prime citserver[10526]: Upgrading modules.
Sep 28 16:17:56 prime citserver[10526]: (null) Modules: Upgrade modules.
Sep 28 16:17:56 prime citserver[10526]: Existing database version on disk is 902
Sep 28 16:17:56 prime citserver[10526]: (null) Modules: upgrade
Sep 28 16:17:56 prime citserver[10526]: (null) Modules: Unix domain socket '/var/run/citadel/citadel.socket': registered.
Sep 28 16:17:56 prime citserver[10526]: (null) Modules: Unix domain socket '/var/run/citadel/citadel-admin.socket': registered.
Sep 28 16:17:56 prime citserver[10526]: Error binding to [192.168.0.0/29] : No such file or directory
Sep 28 16:17:56 prime citserver[10526]: (null) Modules: TCP port 192.168.0.0/29:504: (citadel-TCP) FAILED.
Sep 28 16:17:56 prime citserver[10526]: Initializing server extensions
Sep 28 16:17:56 prime citserver[10526]: (null) Modules: Initializing. CtdlThreads not yet enabled.
Sep 28 16:17:56 prime citserver[10526]: Importing old style bio files into the message base
Sep 28 16:17:56 prime citserver[10526]: Importing old style userpic files into the message base
Sep 28 16:17:56 prime citserver[10526]: Error binding to [192.168.0.0/29] : No such file or directory
Sep 28 16:17:56 prime citserver[10526]: WX Modules: TCP port 192.168.0.0/29:143: (IMAP) FAILED.
Sep 28 16:17:56 prime citserver[10526]: Error binding to [192.168.0.0/29] : No such file or directory
Sep 28 16:17:56 prime citserver[10526]: WX Modules: TCP port 192.168.0.0/29:993: (IMAPS) FAILED.
Sep 28 16:17:56 prime citserver[10526]: Error binding to [192.168.0.0/29] : No such file or directory
Sep 28 16:17:56 prime citserver[10526]: WX Modules: TCP port 192.168.0.0/29:2020: (ManageSieve) FAILED.
Sep 28 16:17:56 prime citserver[10526]: Error binding to [192.168.0.0/29] : File exists
Sep 28 16:17:56 prime citserver[10526]: WX Modules: TCP port 192.168.0.0/29:119: (NNTP) FAILED.
Sep 28 16:17:56 prime citserver[10526]: Error binding to [192.168.0.0/29] : File exists
Sep 28 16:17:56 prime citserver[10526]: WX Modules: TCP port 192.168.0.0/29:563: (NNTPS) FAILED.
Sep 28 16:17:56 prime citserver[10526]: Error binding to [192.168.0.0/29] : File exists
Sep 28 16:17:56 prime citserver[10526]: WX Modules: TCP port 192.168.0.0/29:110: (POP3) FAILED.
Sep 28 16:17:56 prime citserver[10526]: Error binding to [192.168.0.0/29] : File exists
Sep 28 16:17:56 prime citserver[10526]: WX Modules: TCP port 192.168.0.0/29:995: (POP3S) FAILED.
Sep 28 16:17:56 prime citserver[10526]: libcurl/7.52.1 OpenSSL/1.0.2l zlib/1.2.8 libidn2/0.16 libpsl/0.17.0 (+libidn2/0.16) libssh2/1.7.0 nghttp2/1.18.1 librtmp/2.3
Sep 28 16:17:56 prime citserver[10526]: Sieve: libSieve is written and maintained by Aaron Stone with ...
Sep 28 16:17:56 prime citserver[10526]: Sieve: Extensions: regex imap4flags relational fileinto reject envelope vacation
Sep 28 16:17:56 prime citserver[10526]: Error binding to [192.168.0.0/29] : File exists
Sep 28 16:17:56 prime citserver[10526]: WX Modules: TCP port 192.168.0.0/29:25: (SMTP-MTA) FAILED.
Sep 28 16:17:56 prime citserver[10526]: Error binding to [192.168.0.0/29] : File exists
Sep 28 16:17:56 prime citserver[10526]: WX Modules: TCP port 192.168.0.0/29:465: (SMTPs-MTA) FAILED.
Sep 28 16:17:56 prime citserver[10526]: Error binding to [192.168.0.0/29] : File exists
Sep 28 16:17:56 prime citserver[10526]: WX Modules: TCP port 192.168.0.0/29:587: (SMTP-MSA) FAILED.
Sep 28 16:17:56 prime citserver[10526]: WX Modules: Unix domain socket '/var/run/citadel/lmtp.socket': registered.
Sep 28 16:17:56 prime citserver[10526]: WX Modules: Unix domain socket '/var/run/citadel/lmtp-unfiltered.socket': registered.
Sep 28 16:17:56 prime citserver[10526]: Cannot create /etc/citadel/netconfigs/7: No such file or directory
Sep 28 16:17:56 prime citserver[10526]: WX Modules: Service DICT_TCP has been manually disabled, skipping
Sep 28 16:17:56 prime citserver[10526]: Error binding to [192.168.0.0/29] : No such file or directory
Sep 28 16:17:56 prime citserver[10526]: WX Modules: TCP port 192.168.0.0/29:5222: (XMPP) FAILED.
Sep 28 16:17:56 prime citserver[10526]: WX Modules: Citadel had trouble on starting up. We couldn't bind all ports you configured to be provided by citadel server.#012 This means, citadel won't be the service provider for a specific service you configured it to.#012#012If you don't want citadel to provide these services, turn them off in WebCit via: "Admin->System Preferences->Network".#012#012The failed ports and sockets are: TCP port 192.168.0.0/29:504: (citadel-TCP) ;TCP port 192.168.0.0/29:143: (IMAP) ;TCP port 192.168.0.0/29:993: (IMAPS) ;TCP port 192.168.0.0/29:2020: (ManageSieve) ;TCP port 192.168.0.0/29:119: (NNTP) ;TCP port 192.168.0.0/29:563: (NNTPS) ;TCP port 192.168.0.0/29:110: (POP3) ;TCP port 192.168.0.0/29:995: (POP3S) ;TCP port 192.168.0.0/29:25: (SMTP-MTA) ;TCP port 192.168.0.0/29:465: (SMTPs-MTA) ;TCP port 192.168.0.0/29:587: (SMTP-MSA) ;TCP port 192.168.0.0/29:5222: (XMPP) #012#012If you want citadel to provide you with that functionality, check the output of "netstat -lnp" on linux Servers or "netstat -na" on *BSD and stop the program that binds these ports.#012 You should eventually remove  their initscripts in /etc/init.d so that you won't get this trouble once more.#012 After that goto "Administration -> Shutdown Citadel" to make Citadel restart & retry to bind this port.#012#012#012To make both ways actualy take place restart the citserver with "sendcommand down"#012#012The errors returned by the system were:#012Error binding to [192.168.0.0/29] : No such file or directory; Error binding to [192.168.0.0/29] : No such file or directory; Error binding to [192.168.0.0/29] : No such file or directory; Error binding to [192.168.0.0/29] : No such file or directory; Error binding to [192.168.0.0/29] : File exists; Error binding to [192.168.0.0/29] : File exists; Error binding to [192.168.0.0/29] : File exists; Error binding to [192.168.0.0/29] : File exists; Error binding to [192.168.0.0/29] : File exists; Error binding to [192.168.0.0/29] : File exists; Error binding to [192.168.0.0/29] : File exists; Error binding to [192.168.0.0/29] : No such file or directory#012#012You can recheck the above if you follow this faq item:#012http://www.citadel.org/doku.php?id=faq:mastering_your_os:net#netstat
Sep 28 16:17:56 prime citserver[10526]: WX Modules: Startup Problems
Sep 28 16:17:56 prime citserver[10529]:
Sep 28 16:17:56 prime citserver[10529]:
=====

 

The "192.168.0.0/29" referred to in the bind errors can only be from my firewall settings (my LAN machines minus the smartphones).  I don't know how Citadel got hold of that to play with.  I had "0.0.0.0" in the installation configuration, and I have Apache2 running OK.  I've been through the whole thing twice.

 

BTW, the SSL certificate for this domain is a bit odd:

Begins on 27 July 2015

Expires on 5 November 1906



[#] Fri Sep 28 2018 05:02:54 EDT from ioio @ Uncensored

Subject: Re: Intermediate certificate

[Reply] [ReplyQuoted] [Headers] [Print]

 

Thu Sep 27 2018 10:08:38 EDT from IGnatius T Foobar @ Uncensored Subject: Re: Intermediate certificate
Just append the intermediate certificate to your server certificate.

Wow great! It worked! Thank's a lot! :)



[#] Fri Sep 28 2018 09:00:07 EDT from wizard of aahz @ Uncensored

[Reply] [ReplyQuoted] [Headers] [Print]

</scrubs brain with brillo>

[#] Fri Sep 28 2018 18:39:33 EDT from palloy @ Uncensored

Subject: installation on ARM board

[Reply] [ReplyQuoted] [Headers] [Print]

Left it running overnight, and this morning /var/log/syslog was 945 MB and increasing.

2 processes called cit-server running, one changing its PID all the time. Killed the other one and they both disappeared.

dk@prime:~$ sudo netstat -lnp
[sudo] password for dk:
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name   
tcp        0      0 0.0.0.0:2000            0.0.0.0:*               LISTEN      1429/php           
tcp        0      0 0.0.0.0:53              0.0.0.0:*               LISTEN      719/dnsmasq        
tcp        0      0 0.0.0.0:21              0.0.0.0:*               LISTEN      692/pure-ftpd (SERV
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      726/sshd           
tcp6       0      0 :::80                   :::*                    LISTEN      790/apache2        
tcp6       0      0 :::53                   :::*                    LISTEN      719/dnsmasq        
tcp6       0      0 :::21                   :::*                    LISTEN      692/pure-ftpd (SERV
tcp6       0      0 :::22                   :::*                    LISTEN      726/sshd           
tcp6       0      0 :::443                  :::*                    LISTEN      790/apache2        
udp        0      0 0.0.0.0:53              0.0.0.0:*                           719/dnsmasq        
udp        0      0 0.0.0.0:68              0.0.0.0:*                           821/dhclient       
udp        0      0 192.168.0.4:123         0.0.0.0:*                           978/ntpd           
udp        0      0 127.0.0.1:123           0.0.0.0:*                           978/ntpd           
udp        0      0 0.0.0.0:123             0.0.0.0:*                           978/ntpd           
udp6       0      0 :::53                   :::*                                719/dnsmasq        
udp6       0      0 fe80::bad4:a3d1:742:123 :::*                                978/ntpd           
udp6       0      0 ::1:123                 :::*                                978/ntpd           
udp6       0      0 :::123                  :::*                                978/ntpd           
raw6       0      0 :::58                   :::*                    7           566/NetworkManager 
Active UNIX domain sockets (only servers)
=====

That's all normal.

"Check your config !" - OK, but where is it?

 

 

 



[#] Fri Sep 28 2018 23:40:48 EDT from IGnatius T Foobar @ Uncensored

Subject: Re: installation on ARM board

[Reply] [ReplyQuoted] [Headers] [Print]

What's the message that's filling up your syslog?

[#] Sat Sep 29 2018 18:25:22 EDT from palloy @ Uncensored

[Reply] [ReplyQuoted] [Headers] [Print]

What's the message that's filling up your syslog?

The same thing as I put in my first post, the errors about binding ports to "192.168.0.0/29", over and over again.

It starts going wrong with:

Sep 30 07:37:47 prime citserver[18522]: Initializing configuration system
Sep 30 07:37:47 prime citserver[18522]: configuration setting c_default_cal_zone is empty, but must not - check your config!

I've looked in /etc/citadel/citadel.rc and /etc/citadel/webcit.conf but can't see anything to do with "cal_zone".

When it is starting with apache2 already started, citserver has to assign ports 8080 and something (8443 ?) to listen on by default.  It doesn't to do this, but citserver (2 processes) is loaded.



[#] Sun Sep 30 2018 23:28:37 EDT from scott @ Uncensored

[Reply] [ReplyQuoted] [Headers] [Print]

 

Thu Sep 20 2018 16:02:58 EDT from scott @ Uncensored

Quick inquiry:

 

Can a catchall account (*@domain.tld) be setup as an alias for a user account to receive all mail not for a specific user in the domain?

 

As it appears to function, all mail addresses to an invalid user is rejected automatically, but I would like to capture them into a catchall account.



So nobody is using a catchall account and can answer this [presumably] simple question?

I have not been able to setup a catchall account by specifying *@domain.com as an alias.  Should this work?  Am I doing something wrong?



Go to page: First ... 24 25 26 27 [28] 29 30 31