Please wait...
0 files
How did you change the Lobby /dotskip?room=_BASEROOM_ to wiki?page=home?
How do wiki pages work?
It seams you create a new post every edit.
Can one delete old pages? I am guessing one could do that in an IMAP login, is that save to do?
What does publish to Blog do, or what is it supposed to do? It does not do anything on my server.
I remember when I posted my docker setup here 9 years ago, I was laughed
out of town!
Well let's just say that you were more forward thinking than the rest of us :)
I took a look at your Dockerfile and I see you were supervising several programs with a shell script, whereas the new official Dockerfile use a custom supervisor.
I'm sure there are SOA purists out there who will point out that one should never run multiple services from the same container, but we did this for ease of installation, not for SOA.
How did you change the Lobby /dotskip?room=_BASEROOM_ to
wiki?page=home?
webcit has a "-g" flag that will enter its value as the first command sent to it. (The container has a similar flag that will pass it along to webcit.)
So you can do something like
webcit [other commands] -g "/dotgoto?room=Welcome to UNCENSORED!"
You can put anything in there you want. I chose to go with the welcome wiki because we can control exactly what it says on the front page.
How do wiki pages work?
It seams you create a new post every edit.
Yes, it does create a new post every edit, but the new post has the same EUID as the one being replaced, so it shows up indexed in the same place.
There is also a hidden chain of MIME parts containing diffs of the edit history.
Clever, right? ;)
Yes that wiki trick is clever.
Can you tell me what is happening here. I am using Let's Encrypt from: https://citadel.org/sslcertificates.html
telnet mail.hansaray.pw 587 0.977s (master) 20:54
Trying 107.189.21.115...
Connected to mail.hansaray.pw.
Escape character is '^]'.
220 mail.hansaray.pw ESMTP Citadel server ready.
ehlo
250-Hello (37.155.91.16 [37.155.91.16])
250-HELP
250-SIZE 10485760
250-STARTTLS
250-AUTH LOGIN PLAIN
250-AUTH=LOGIN PLAIN
250 8BITMIME
starttls
554 TLS not supported here
quit
221 Goodbye...
Connection closed by foreign host.
~/P/go.hansaray.pw►telnet mail.hansaray.pw 587 27.261s (master) 21:10
Trying 107.189.21.115...
Connected to mail.hansaray.pw.
Escape character is '^]'.
220 mail.hansaray.pw ESMTP Citadel server ready.
ehlo
250-Hello (37.155.91.16 [37.155.91.16])
250-HELP
250-SIZE 10485760
250-STARTTLS
250-AUTH LOGIN PLAIN
250-AUTH=LOGIN PLAIN
250 8BITMIME
starttls
554 TLS not supported here
quit
221 Goodbye...
Connection closed by foreign host.
~/P/go.hansaray.pw►telnet mail.hansaray.pw 25 22.01s (master) 21:12
Trying 107.189.21.115...
Connected to mail.hansaray.pw.
Escape character is '^]'.
220 mail.hansaray.pw ESMTP Citadel server ready.
helo
250 Hello (37.155.91.16 [37.155.91.16])
starttls
554 TLS not supported here
ehlo
250-Hello (37.155.91.16 [37.155.91.16])
250-HELP
250-SIZE 10485760
250-STARTTLS
250-AUTH LOGIN PLAIN
250-AUTH=LOGIN PLAIN
250 8BITMIME
How did you change the Lobby /dotskip?room=_BASEROOM_ to
wiki?page=home?
webcit has a "-g" flag that will enter its value as the first command sent to it. (The container has a similar flag that will pass it along to webcit.)
So you can do something like
webcit [other commands] -g "/dotgoto?room=Welcome to UNCENSORED!"
You can put anything in there you want. I chose to go with the welcome wiki because we can control exactly what it says on the front page.
I like that, but How?
Do I modify the docker run command? Can you post an example please?
See it works fine for webcit. You can see it here: https://mail.hansaray.pw/
Wed Apr 02 2025 18:24:01 UTC from TaMeR
Yes that wiki trick is clever.
Can you tell me what is happening here. I am using Let's Encrypt from: https://citadel.org/sslcertificates.html
telnet mail.hansaray.pw 587 0.977s (master) 20:54
Trying 107.189.21.115...
Connected to mail.hansaray.pw.
Escape character is '^]'.
220 mail.hansaray.pw ESMTP Citadel server ready.
ehlo
250-Hello (37.155.91.16 [37.155.91.16])
250-HELP
250-SIZE 10485760
250-STARTTLS
250-AUTH LOGIN PLAIN
250-AUTH=LOGIN PLAIN
250 8BITMIME
starttls
554 TLS not supported here
quit
221 Goodbye...
Connection closed by foreign host.
~/P/go.hansaray.pw►telnet mail.hansaray.pw 587 27.261s (master) 21:10
Trying 107.189.21.115...
Connected to mail.hansaray.pw.
Escape character is '^]'.
220 mail.hansaray.pw ESMTP Citadel server ready.
ehlo
250-Hello (37.155.91.16 [37.155.91.16])
250-HELP
250-SIZE 10485760
250-STARTTLS
250-AUTH LOGIN PLAIN
250-AUTH=LOGIN PLAIN
250 8BITMIME
starttls
554 TLS not supported here
quit
221 Goodbye...
Connection closed by foreign host.
~/P/go.hansaray.pw►telnet mail.hansaray.pw 25 22.01s (master) 21:12
Trying 107.189.21.115...
Connected to mail.hansaray.pw.
Escape character is '^]'.
220 mail.hansaray.pw ESMTP Citadel server ready.
helo
250 Hello (37.155.91.16 [37.155.91.16])
starttls
554 TLS not supported here
ehlo
250-Hello (37.155.91.16 [37.155.91.16])
250-HELP
250-SIZE 10485760
250-STARTTLS
250-AUTH LOGIN PLAIN
250-AUTH=LOGIN PLAIN
250 8BITMIME
lighttpd webserver to proxy webcit
Make sure you have set the host IP 127.0.1.2 to mail.example.net
server.modules += ( "mod_proxy", "mod_openssl" )
$HTTP["host"] == "mail.example.net" { proxy.balance = "hash" proxy.server = ( "" => ( "citadel" => ( "host" => "127.0.1.2", "port" => "8080" ) ) ) ssl.pemfile = "/etc/letsencrypt/live/mail.example.net/fullchain.pem" ssl.privkey = "/etc/letsencrypt/live/mail.example.net/privkey.pem" }
Something is wrong with the ssl. Hope you can help out.
openssl s_client -debug -starttls smtp -crlf -connect mail.hansaray.pw:587 01:25 Connecting to 107.189.21.115 CONNECTED(00000003) read from 0x5613738ac620 [0x5613738ab340] (4096 bytes => 50 (0x32)) 0000 - 32 32 30 20 6d 61 69 6c-2e 68 61 6e 73 61 72 61 220 mail.hansara 0010 - 79 2e 70 77 20 45 53 4d-54 50 20 43 69 74 61 64 y.pw ESMTP Citad 0020 - 65 6c 20 73 65 72 76 65-72 20 72 65 61 64 79 2e el server ready. 0030 - 0d 0a .. write to 0x5613738ac620 [0x5613738adae0] (23 bytes => 23 (0x17)) 0000 - 45 48 4c 4f 20 6d 61 69-6c 2e 65 78 61 6d 70 6c EHLO mail.exampl 0010 - 65 2e 63 6f 6d 0d 0a e.com.. read from 0x5613738ac620 [0x5613738ab340] (4096 bytes => 58 (0x3A)) 0000 - 32 35 30 2d 48 65 6c 6c-6f 20 6d 61 69 6c 2e 65 250-Hello mail.e 0010 - 78 61 6d 70 6c 65 2e 63-6f 6d 20 28 33 37 2e 31 xample.com (37.1 0020 - 35 35 2e 39 31 2e 31 36-20 5b 33 37 2e 31 35 35 55.91.16 [37.155 0030 - 2e 39 31 2e 31 36 5d 29-0d 0a .91.16]).. read from 0x5613738ac620 [0x5613738ab340] (4096 bytes => 101 (0x65)) 0000 - 32 35 30 2d 48 45 4c 50-0d 0a 32 35 30 2d 53 49 250-HELP..250-SI 0010 - 5a 45 20 31 30 34 38 35-37 36 30 0d 0a 32 35 30 ZE 10485760..250 0020 - 2d 53 54 41 52 54 54 4c-53 0d 0a 32 35 30 2d 41 -STARTTLS..250-A 0030 - 55 54 48 20 4c 4f 47 49-4e 20 50 4c 41 49 4e 0d UTH LOGIN PLAIN. 0040 - 0a 32 35 30 2d 41 55 54-48 3d 4c 4f 47 49 4e 20 .250-AUTH=LOGIN 0050 - 50 4c 41 49 4e 0d 0a 32-35 30 20 38 42 49 54 4d PLAIN..250 8BITM 0060 - 49 4d 45 0d 0a IME.. write to 0x5613738ac620 [0x7ffc42ccb550] (10 bytes => 10 (0xA)) 0000 - 53 54 41 52 54 54 4c 53-0d 0a STARTTLS.. read from 0x5613738ac620 [0x5613738505e0] (8192 bytes => 28 (0x1C)) 0000 - 35 35 34 20 54 4c 53 20-6e 6f 74 20 73 75 70 70 554 TLS not supp 0010 - 6f 72 74 65 64 20 68 65-72 65 0d 0a orted here.. write to 0x5613738ac620 [0x5613738b2e40] (324 bytes => 324 (0x144)) 0000 - 16 03 01 01 3f 01 00 01-3b 03 03 b3 32 d1 80 5e ....?...;...2..^ 0010 - 7a a7 90 f7 b1 0c a2 6c-1b 62 66 6e de fd 93 fe z......l.bfn.... 0020 - 8a 58 25 2e 6a 30 38 7e-34 7c 5e 20 8c 6b 4f ea .X%.j08~4|^ .kO. 0030 - 6a 33 68 af 6e 49 a9 52-f1 cc 90 15 00 26 35 f2 j3h.nI.R.....&5. 0040 - 6c 1e 8a 38 3d 5b 01 6e-76 de 86 29 00 3e 13 02 l..8=[.nv..).>.. 0050 - 13 03 13 01 c0 2c c0 30-00 9f cc a9 cc a8 cc aa .....,.0........ 0060 - c0 2b c0 2f 00 9e c0 24-c0 28 00 6b c0 23 c0 27 .+./...$.(.k.#.' 0070 - 00 67 c0 0a c0 14 00 39-c0 09 c0 13 00 33 00 9d .g.....9.....3.. 0080 - 00 9c 00 3d 00 3c 00 35-00 2f 00 ff 01 00 00 b4 ...=. 0)
Subject: Help need in "Fully qualified domain name" configuration.
Dear All,
I want to configure my server with "Fully qualified domain name".
The email subdomain will be mail.host.net (as an example).
There is a setting of "Fully qualified domain name" in the Citadel.
I have several questions:
1st Can I set the Fully qualified domain name as mail.host.net and the emails addresses as xxxxxxx@host.net? What must be done for that?
2nd What to put in the below setting? "host.net"?
3th I suppose I must set my DNS registry to answer also to "mail.host.net"
4th I suppose I must put the reverse DNS as "mail.host.net"
5th In the email client configuration the servers will be "mail.host.net".
Thank you for the possible answers,
Luís Gonçalves.
Subject: Re: Help need in "Fully qualified domain name" configuration.
Thu Apr 03 2025 15:38:03 UTCfrom luisgo Subject: Help need in "Fully qualified domain name" configuration.Dear All,
I want to configure my server with "Fully qualified domain name".
The email subdomain will be mail.host.net (as an example).
There is a setting of "Fully qualified domain name" in the Citadel.
I have several questions:
1st Can I set the Fully qualified domain name as mail.host.net and the emails addresses as xxxxxxx@host.net? What must be done for that?
Yes,
- Just go in to the mail.host.net/select_user_to_edit
- Select user from "Edit or Delete users"
- Select Edit configuration
- modify Primary Internet e-mail address to xxx@host.net
- below at Internet e-mail aliases you can add aliases such as yyy@host.net, yyy@mail.host.net. webmaster@host.net, postmaster@host.net
2nd What to put in the below setting? "host.net"?
Local host aliases(domains for which this host receives mail)
Yes, You can add multiples, separate with coma such as host.net, mail.host.net
3th I suppose I must set my DNS registry to answer also to "mail.host.net"
Yes
4th I suppose I must put the reverse DNS as "mail.host.net"
Yes
5th In the email client configuration the servers will be "mail.host.net".
Yes
Thank you for the possible answers,
Luís Gonçalves.
Subject: Re: Help need in "Fully qualified domain name" configuration.
I forgot to ask.
And in the SSL certificates? I will have two. One for "host.net" and "www.host.net" and other for "mail.host.net". Do I put both in citadel?
Thu Apr 03 2025 20:58:20 UTC from TaMeR Subject: Re: Help need in "Fully qualified domain name" configuration.
Thu Apr 03 2025 15:38:03 UTCfrom luisgo Subject: Help need in "Fully qualified domain name" configuration.Dear All,
I want to configure my server with "Fully qualified domain name".
The email subdomain will be mail.host.net (as an example).
There is a setting of "Fully qualified domain name" in the Citadel.
I have several questions:
1st Can I set the Fully qualified domain name as mail.host.net and the emails addresses as xxxxxxx@host.net? What must be done for that?
Yes,
- Just go in to the mail.host.net/select_user_to_edit
- Select user from "Edit or Delete users"
- Select Edit configuration
- modify Primary Internet e-mail address to xxx@host.net
- below at Internet e-mail aliases you can add aliases such as yyy@host.net, yyy@mail.host.net. webmaster@host.net, postmaster@host.net
2nd What to put in the below setting? "host.net"?
Local host aliases(domains for which this host receives mail)Yes, You can add multiples, separate with coma such as host.net, mail.host.net
3th I suppose I must set my DNS registry to answer also to "mail.host.net"
Yes
4th I suppose I must put the reverse DNS as "mail.host.net"
Yes
5th In the email client configuration the servers will be "mail.host.net".
Yes
Thank you for the possible answers,
Luís Gonçalves.
Subject: Re: Help need in "Fully qualified domain name" configuration.
I forgot to ask.
And in the SSL certificates? I will have two. One for "host.net" and "www.host.net" and other for "mail.host.net". Do I put both in citadel?
And a new DKIM key will be generated or it will be the same?
Thu Apr 03 2025 20:58:20 UTC from TaMeR Subject: Re: Help need in "Fully qualified domain name" configuration.
Thu Apr 03 2025 15:38:03 UTCfrom luisgo Subject: Help need in "Fully qualified domain name" configuration.Dear All,
I want to configure my server with "Fully qualified domain name".
The email subdomain will be mail.host.net (as an example).
There is a setting of "Fully qualified domain name" in the Citadel.
I have several questions:
1st Can I set the Fully qualified domain name as mail.host.net and the emails addresses as xxxxxxx@host.net? What must be done for that?
Yes,
- Just go in to the mail.host.net/select_user_to_edit
- Select user from "Edit or Delete users"
- Select Edit configuration
- modify Primary Internet e-mail address to xxx@host.net
- below at Internet e-mail aliases you can add aliases such as yyy@host.net, yyy@mail.host.net. webmaster@host.net, postmaster@host.net
2nd What to put in the below setting? "host.net"?
Local host aliases(domains for which this host receives mail)Yes, You can add multiples, separate with coma such as host.net, mail.host.net
3th I suppose I must set my DNS registry to answer also to "mail.host.net"
Yes
4th I suppose I must put the reverse DNS as "mail.host.net"
Yes
5th In the email client configuration the servers will be "mail.host.net".
Yes
Thank you for the possible answers,
Luís Gonçalves.
Subject: Re: Help need in "Fully qualified domain name" configuration.
And a new DKIM key will be generated or it will be the same?
The DKIM key should not change.
However it will be posted to the AIDE room if there is a change. For example if you add a new alias domain, you will get a new DKIM post in to the AIDE room for the new domain.
Where are the webcit static files? In docker that is.
I can't find them anywhere, well the find command can't find them.
They should be in /usr/local/webcit/static but that directory is completely empty.
I still haven't figured out why STARTTLS isn't supported here?
Following is the output:
telnet mail.hansaray.pw 587 1635.108s 15:23
Trying 107.189.21.115...
Connected to mail.hansaray.pw.
Escape character is '^]'.
220 mail.hansaray.pw ESMTP Citadel server ready.
ehlo
250-Hello (37.155.91.16 [37.155.91.16])
250-HELP
250-SIZE 10485760
250-STARTTLS
250-AUTH LOGIN PLAIN
250-AUTH=LOGIN PLAIN
250 8BITMIME
starttls
554 TLS not supported here
quit
221 Goodbye...
Connection closed by foreign host.
I still haven't figured out why STARTTLS isn't working here.
Following is the output:
telnet mail.hansaray.pw 587 1635.108s 15:23
Trying 107.189.21.115...
Connected to mail.hansaray.pw.
Escape character is '^]'.
220 mail.hansaray.pw ESMTP Citadel server ready.
ehlo
250-Hello (37.155.91.16 [37.155.91.16])
250-HELP
250-SIZE 10485760
250-STARTTLS
250-AUTH LOGIN PLAIN
250-AUTH=LOGIN PLAIN
250 8BITMIME
starttls
554 TLS not supported here
quit
221 Goodbye...
Connection closed by foreign host.
Where are the webcit static files? In docker that is.
I can't find them anywhere, well the find command can't find them.They should be in /usr/local/webcit/static but that directory is completely empty.
I figured this out. I had added a volume and that removed it of coarse. I know I am an idiot.
This is what I did add to docker run
--volume=/usr/local/webcit/static:/usr/local/webcit/static \
Subject: Re: Help need in "Fully qualified domain name" configuration.
Good morning (there),
About "And in the SSL certificates? I will have two. One for "host.net" and "www.host.net" and other for "mail.host.net". Do I put both in citadel?"
Can I put two private keys etc in the same file (/usr/local/citadel/keys/citadel.key) (and also in the other keys files)? One private key for "host.net" and other for "mail.host.net".
Thanks,
Luís.
Fri Apr 04 2025 09:40:23 UTC from luisgo Subject: Re: Help need in "Fully qualified domain name" configuration.I forgot to ask.
And in the SSL certificates? I will have two. One for "host.net" and "www.host.net" and other for "mail.host.net". Do I put both in citadel?
And a new DKIM key will be generated or it will be the same?
Thu Apr 03 2025 20:58:20 UTC from TaMeR Subject: Re: Help need in "Fully qualified domain name" configuration.
Thu Apr 03 2025 15:38:03 UTCfrom luisgo Subject: Help need in "Fully qualified domain name" configuration.Dear All,
I want to configure my server with "Fully qualified domain name".
The email subdomain will be mail.host.net (as an example).
There is a setting of "Fully qualified domain name" in the Citadel.
I have several questions:
1st Can I set the Fully qualified domain name as mail.host.net and the emails addresses as xxxxxxx@host.net? What must be done for that?
Yes,
- Just go in to the mail.host.net/select_user_to_edit
- Select user from "Edit or Delete users"
- Select Edit configuration
- modify Primary Internet e-mail address to xxx@host.net
- below at Internet e-mail aliases you can add aliases such as yyy@host.net, yyy@mail.host.net. webmaster@host.net, postmaster@host.net
2nd What to put in the below setting? "host.net"?
Local host aliases(domains for which this host receives mail)Yes, You can add multiples, separate with coma such as host.net, mail.host.net
3th I suppose I must set my DNS registry to answer also to "mail.host.net"
Yes
4th I suppose I must put the reverse DNS as "mail.host.net"
Yes
5th In the email client configuration the servers will be "mail.host.net".
Yes
Thank you for the possible answers,
Luís Gonçalves.