Language:
switch to room list switch to menu My folders
Go to page: 1 [2] 3 4 5 6 ... Last
[#] Sat May 06 2023 01:26:25 EDT from xhabit

Subject: Re: how i can repair a user?

[Reply] [ReplyQuoted] [Headers] [Print]

this problem, i'dont found some solution, to get back a user, what is still there but not visible at webinterface. i'm using the internal user management. maybe something is here buggy ... i'dont know ...

 

Wed May 03 2023 10:42:29 EDT from xhabit Subject: Re: how i can repair a user?

so, now later read here and found a solution, i'was found this auto-purge process, and set a time, but the user was not delete. still i can use <.A>dmin <U>ser <E>dit

but how often i'do this, the user dont come up in the menu again. and "<.A>dmin <U>ser <D>elete" i'was do also several times. and later let run the purge process. still the user

is there. for workaround i'was create some other user, and set with global aliases all incoming emails to this user.

so, and at this point now, i'dont know ... and nothing more to read what can help. maybe someone have a idea ..

 

 

Wed May 03 2023 05:39:20 EDT from xhabit Subject: Re: how i can repair a user?

I'was found this Info, here. But when will run this automatic task to purge useraccounts?

 

--- message start ---

Ok, you're working really hard on a solution and your effort is very much appreciated.  Thank you for that.

Let's try the text mode client.  Go to your host system and enter the following commands:

cd /usr/local/citadel
./citadel

This will start the console mode client.  Log in as an administrator.  It will probably start showing you messages in the Lobby.  You can hit S for "Stop" and you will get the room prompt (Lobby>).

The commands you're interested in now are "" and probably "<.A>dmin <U>ser <D>elete".  Type the "." (period) and then the first letter of each command (A, U, etc).   At any point you can hit the "?" (question mark) to show all of the available subcommands at that level.

This is probably easier than playing around with AGUP and ASUP.  The client will send those commands to the server for you.  

Hint: if you delete a user, it actually only sets their access level to 0 (Deleted) and the actual deletion will be performed when the auto-purger runs.

So go ahead and try that.  If these commands verify that the user really does exist, and you're able to delete that account, but the email address remains unavailable, say so here and we'll figure out whether there's an actual software problem that needs to be coded around.

---- message end ----

 

Wed May 03 2023 03:39:05 EDT from xhabit Subject: Re: how i can repair a user?

second, i'dont know how this was happen, i'was go to sleep, and today in the morning, the mail client means no login, i'dont know what was happen in the night. the only thing was the backup was running, at this VM in proxmox.

Wed May 03 2023 03:29:36 EDT from xhabit Subject: how i can repair a user?

Hi,

at my server, is a user, what is not show, i'cant delete, i'cant create new this user. citadel say: user exist. i'was read the dokumentation, but dont found a way ...

 



 



 



 



 



[#] Mon May 08 2023 06:55:52 EDT from hb9xcl

Subject: two questions...

[Reply] [ReplyQuoted] [Headers] [Print]

Hi guys

I've installed Citadel on my Ubuntu server, it works great. Still I have two questions, hope you can help me:

 

As I plan to use Citadel in our AREDN Mesh Network, I don't need the login options like Yahoo, Google etc... how can I get rid of them? (where can I deactivate them, so they don't appear on the Login screen)

The screen looks like it's compressed, i.e. I don't have the "language" drop down field in the upper left corner as you see it here, but the text "en_US" shows halfway in the "summary" button. Any Idea how I could correct that? It's not sooo problematic but just looks a bit ugly.

I'm not a tech guy, especially not for Linux stuff, so if you can help me, please try do do it in a "for dummies" format ;-)

Thanks for your help in advance!

Kind regards

Kurt

 



[#] Mon May 08 2023 07:08:05 EDT from xhabit

Subject: Re: two questions...

[Reply] [ReplyQuoted] [Headers] [Print]

i'have only the info what stay in citanews, about next versions

 

Mon May 08 2023 06:55:52 EDT from hb9xcl Subject: two questions...

Hi guys

I've installed Citadel on my Ubuntu server, it works great. Still I have two questions, hope you can help me:

 

As I plan to use Citadel in our AREDN Mesh Network, I don't need the login options like Yahoo, Google etc... how can I get rid of them? (where can I deactivate them, so they don't appear on the Login screen)

The screen looks like it's compressed, i.e. I don't have the "language" drop down field in the upper left corner as you see it here, but the text "en_US" shows halfway in the "summary" button. Any Idea how I could correct that? It's not sooo problematic but just looks a bit ugly.

I'm not a tech guy, especially not for Linux stuff, so if you can help me, please try do do it in a "for dummies" format ;-)

Thanks for your help in advance!

Kind regards

Kurt

 



 



[#] Tue May 09 2023 00:44:48 EDT from yjlion

Subject: Re: two questions...

[Reply] [ReplyQuoted] [Headers] [Print]

On the shell run sudo dpkg-reconfigure locales, and choose the languages you want. 

Mon May 08 2023 06:55:52 AM EDT from hb9xcl Subject: two questions...

Hi guys

I've installed Citadel on my Ubuntu server, it works great. Still I have two questions, hope you can help me:

 

As I plan to use Citadel in our AREDN Mesh Network, I don't need the login options like Yahoo, Google etc... how can I get rid of them? (where can I deactivate them, so they don't appear on the Login screen)

The screen looks like it's compressed, i.e. I don't have the "language" drop down field in the upper left corner as you see it here, but the text "en_US" shows halfway in the "summary" button. Any Idea how I could correct that? It's not sooo problematic but just looks a bit ugly.

I'm not a tech guy, especially not for Linux stuff, so if you can help me, please try do do it in a "for dummies" format ;-)

Thanks for your help in advance!

Kind regards

Kurt

 



 



[#] Tue May 09 2023 05:43:19 EDT from sebbsky

Subject: have little problem with SSL Cert

[Reply] [ReplyQuoted] [Headers] [Print]

Hello, i have installed a Citadel with no problems, all works fine, but i have little problem with SSL Cert. In ssllabs i have grade B and i need to get A :) first problem its "This server's certificate chain is incomplete. Grade caped to B.

i have copied my authorized certs to directory /usr/local/citadel/keys

what i do wrong?



[#] Tue May 09 2023 12:22:44 EDT from s3cr3to to Citadel_Support <room_Citadel_Support@uncensored.citadel.org>

Subject: Re: have little problem with SSL Cert

[Reply] [ReplyQuoted] [Headers] [Print]

I think the ownership should include "citadel":

# ls -la  /usr/local/citadel/keys
-rw-------  1 root    citadel  xxxx Jul xx  20xx citadel.cer
-rw-------  1 root    citadel  xxxx Jul xx  20xx citadel.csr
-rw-------  1 root    citadel  xxxx Jul xx  20xx citadel.key

Regards

On 5/9/23 03:43, sebbsky wrote:

Hello, i have installed a Citadel with no problems, all works fine, but i have little problem with SSL Cert. In ssllabs i have grade B and i need to get A :) first problem its "This server's certificate chain is incomplete. Grade caped to B.


i have copied my authorized certs to directory /usr/local/citadel/keys

what i do wrong?




[#] Mon May 15 2023 13:43:35 EDT from cjonline

Subject: Email alias.

[Reply] [ReplyQuoted] [Headers] [Print]

Hi,

How do I set up an email alias for a user..

 

I logged in as administrator,edited the user record.. typed in alias in to email alias field,hit save.  When I go back in to view my change the field is still blank?

User - user1@mydomain.com

Alias - alias@mydomain.com

 

Craig



[#] Tue May 16 2023 02:38:36 EDT from xhabit

Subject: Re: Email alias.

[Reply] [ReplyQuoted] [Headers] [Print]

at window, edit user parameter, you can setup more then one email add. 

 

Mon May 15 2023 13:43:35 EDT from cjonline Subject: Email alias.

Hi,

How do I set up an email alias for a user..

 

I logged in as administrator,edited the user record.. typed in alias in to email alias field,hit save.  When I go back in to view my change the field is still blank?

User - user1@mydomain.com

Alias - alias@mydomain.com

 

Craig



 



[#] Tue May 16 2023 08:48:55 EDT from cjonline

Subject: Re: Email alias.

[Reply] [ReplyQuoted] [Headers] [Print]

hi, the issue is I had a mailbox user named INFO with the email info@domain.com.

 

I deleted this mailbox so I could add the info@ address to another user's alias..

when I try to add this email address to the others users alias, it accepts it... however, when I go back in to user record the alias has GONE!

 

I assume the old INFO mailbox is still present somewhere in the backend but I cant find it... how do I clean this up?

 

Craig.



[#] Wed May 17 2023 04:40:29 EDT from cjonline

Subject: Re: Email alias.

[Reply] [ReplyQuoted] [Headers] [Print]

I fixed it by rebuilding the index :)  seems there is a bug when deleting users.

Tue May 16 2023 08:48:55 EDT from cjonline Subject: Re: Email alias.

hi, the issue is I had a mailbox user named INFO with the email info@domain.com.

 

I deleted this mailbox so I could add the info@ address to another user's alias..

when I try to add this email address to the others users alias, it accepts it... however, when I go back in to user record the alias has GONE!

 

I assume the old INFO mailbox is still present somewhere in the backend but I cant find it... how do I clean this up?

 

Craig.



 



[#] Wed May 17 2023 16:06:39 EDT from josephmmmorgan

Subject: Re: Is Citadel multi-tennant?

[Reply] [ReplyQuoted] [Headers] [Print]

So I see I was exploring this last August!   Then I got awfully busy and now am at the point I need to finish this up.

I don't think I can use let's encrypt because I'm not (yet) hosting my web domains on the same server, and from what I'm reading, I would need to.  No biggie for me, I can pay $15 a year for the domains I need to support to get my certs signed.

I'm interested in your reverse proxy setup.   In your proxy, you have, say, mail.example1.com and mail.example2.com certificates.  When the proxy forwards to Citadel, how does it resolve, say, joe@example1.com from joe@example2.com?   In other words, let's say I have example1.com and example2.com listed in my local hosts in Citadel.  Of course, then I have a user "joe".   When an email arrives at my proxy as "joe@example1.com" and is forwarded to Citadel, does it just use the propagated headers to file it to the proper mail box?

 

 

 

Wed Aug 10 2022 14:36:24 EDT from mrsfeathers Subject: Re: Is Citadel multi-tennant?

it would CERT-ainly be the easiest way, as afaik citadel was made for small use cases and only takes one cert.. so you'd have to combine them. easiest way to combine them and keep them up to date is lets encrypt.. and the mail server should be visible at least at mail.example1.com and mail.example2.com if you set it up right with multidomains.. and when you request mail.example1.com and mail.example2.com it SHOULD also grant example1.com and example2.com by default... so even if your mail server isn't the main website on the domain, it should work. for me, i have an nginx reverse proxy on my domain.tld and mail is mail.domain.tld and all my certs are handled by the reverse proxy which then just has a cron that rsyncs them to all the other web-facing servers in my network daily, so every system always has up to date certs and if a system fails, i get notified about it via the cron email thingy and i just have the rsync directory be the one that citadel takes its certs from and then just forget about it. of course, make sure you can only log into whatever user via SSH certs and not passwords, because that's safer.

 

 


 



[#] Wed May 17 2023 17:26:39 EDT from josephmmmorgan

Subject: Re: Is Citadel multi-tennant?

[Reply] [ReplyQuoted] [Headers] [Print]

So I see I was exploring this last August!   Then I got awfully busy and now am at the point I need to finish this up.

I don't think I can use let's encrypt because I'm not (yet) hosting my web domains on the same server, and from what I'm reading, I would need to.  No biggie for me, I can pay $15 a year for the domains I need to support to get my certs signed.

I'm interested in your reverse proxy setup.   In your proxy, you have, say, mail.example1.com and mail.example2.com certificates.  When the proxy forwards to Citadel, how does it resolve, say, joe@example1.com from joe@example2.com?   In other words, let's say I have example1.com and example2.com listed in my local hosts in Citadel.  Of course, then I have a user "joe".   When an email arrives at my proxy as "joe@example1.com" and is forwarded to Citadel, does it just use the propagated headers to file it to the proper mail box?

 

 

 

Wed Aug 10 2022 14:36:24 EDT from mrsfeathers Subject: Re: Is Citadel multi-tennant?

it would CERT-ainly be the easiest way, as afaik citadel was made for small use cases and only takes one cert.. so you'd have to combine them. easiest way to combine them and keep them up to date is lets encrypt.. and the mail server should be visible at least at mail.example1.com and mail.example2.com if you set it up right with multidomains.. and when you request mail.example1.com and mail.example2.com it SHOULD also grant example1.com and example2.com by default... so even if your mail server isn't the main website on the domain, it should work. for me, i have an nginx reverse proxy on my domain.tld and mail is mail.domain.tld and all my certs are handled by the reverse proxy which then just has a cron that rsyncs them to all the other web-facing servers in my network daily, so every system always has up to date certs and if a system fails, i get notified about it via the cron email thingy and i just have the rsync directory be the one that citadel takes its certs from and then just forget about it. of course, make sure you can only log into whatever user via SSH certs and not passwords, because that's safer.

 

 


 



[#] Mon May 22 2023 16:51:23 EDT from 360fc

Subject: Full text keeps flushing over and over

[Reply] [ReplyQuoted] [Headers] [Print]

Just got a new server and migrated all data over. 4.5GB total 150000 objects

 

there is one issue and its been going for a day now writing to disk.

Can anyone give details how this function works or if this is normal operation



screenshot.2023-05-22.jpg (image/jpeg, 144259 bytes) [ View | Download ]
screenshot.2023-05-22 (1).jpg (image/jpeg, 1081248 bytes) [ View | Download ]
[#] Tue May 23 2023 00:16:11 EDT from Tom Q Servo

Subject: biggest oversight in the Cita Solar System

[Reply] [ReplyQuoted] [Headers] [Print]

True fact: I spend most of my work day playing a game, I think it's called "Forgot My Password" and its a clickable link on almost every website invented since geocities. I click that game and it invariably although somewhat different per site, gives me clues as to how to reset a forgotten password. I know passwords should never be written down and post-it noted near the computer, so I go a step further and not only refuse to write passwords down, but also I refuse to commit them to my own memory.

I tried (without success, probably due to my ADD or Alcoholism or both) to implement a "Forgot my Password" routine in webcit for citadel.smashbot.com. I think IRRC the problem I ran into, if I remember correctly, sans repeating myself was that webcit uses Berkeley DB, noSql... I guess I am too stupid to figure out how to do it.

SO- can anyone talk about solving the biggest oversight in the citadel solar system? Forgot My Password! I am tired of being someone else. I started to talk about this very topic and, no...wait, that wasn't me.



[#] Tue May 23 2023 07:00:08 EDT from nonservator

Subject: Re: biggest oversight in the Cita Solar System

[Reply] [ReplyQuoted] [Headers] [Print]

One way is to implement U2F authentication with hardware keys that you treat the same as every other important key on a physical keyring.



[#] Wed May 24 2023 07:00:00 EDT from tabbi

Subject: Re: How works the automatic message eraser in webcit?

[Reply] [ReplyQuoted] [Headers] [Print]

 

Mon May 01 2023 23:16:25 EDT from IGnatius T Foobar Subject: Re: How works the automatic message eraser in webcit?
I want to erase all old messages after a year. How do it works? I try it
in
webcit, but it dosnt save these settings?!

Remember that you can apply these settings on an individual room, a floor, or the whole system. Check to see if you're applying it in the correct place.

I want to use this settings for the whole system. I must do it with webcit.

I login as admin, go to the system settings and there is a tab "automatic eraser" and there I can set ph to erase all messages being older than 365 days. I save this but when I open this site the next time, the old standard is shown. No automatic eraser!!



[#] Wed Jun 07 2023 13:29:59 EDT from centos7

Subject: New user trying to navigate around

[Reply] [ReplyQuoted] [Headers] [Print]

I just installed citadel through easyinstall, how to I get to web client?

 



[#] Wed Jun 07 2023 18:00:51 EDT from IGnatius T Foobar

Subject: Re: New user trying to navigate around

[Reply] [ReplyQuoted] [Headers] [Print]

I just installed citadel through easyinstall, how to I get to web
client?

With a web browser.

[#] Tue Jun 13 2023 14:17:47 EDT from ramponderson

Subject: Trying to understand attachments

[Reply] [ReplyQuoted] [Headers] [Print]

Hello all,

 

I just got Citadel running (installed using Easy-Install on a raspi 0w) and am trying to add an attachment to a post in the lobby. When drafting the message, I added the attachment by clicking on the Attachments tab, but I cannot find the attachment after posting. What am I doing wrong here?

 

Thanks for your help



[#] Tue Jun 13 2023 15:36:35 EDT from ramponderson

Subject: Re: Trying to understand attachments

[Reply] [ReplyQuoted] [Headers] [Print]

After looking through settings a bit deeper, I found it. Thanks to the developers for this awesome tool.

Tue Jun 13 2023 14:17:47 EDT from ramponderson Subject: Trying to understand attachments

Hello all,

 

I just got Citadel running (installed using Easy-Install on a raspi 0w) and am trying to add an attachment to a post in the lobby. When drafting the message, I added the attachment by clicking on the Attachments tab, but I cannot find the attachment after posting. What am I doing wrong here?

 

Thanks for your help



 



Go to page: 1 [2] 3 4 5 6 ... Last