Language:
switch to room list switch to menu My folders
Go to page: First ... 20 21 22 23 [24] 25 26 27
[#] Tue Sep 21 2021 17:41:42 EDT from michael

Subject: SMTP authentication fails, POP3 ok...

[Reply] [ReplyQuoted] [Headers] [Print]

Hi,

i installed Citadel via easy-install. Everything works fine, i can receive e-mails via pop3 port 110. But when i try to send e-mails via smpt port 25 or in my case port 26 (changed the port via webcit) i get an authentication failure:

Sep 21 20:29:17 db0alg citserver[8069]: citserver[8069]: context: session (SMTP-MTA) started from 192.168.2.128 (192.168.2.128) uid=-1

Sep 21 20:29:17 db0alg citserver[8069]: context: session (SMTP-MTA) started from 192.168.2.128 (192.168.2.128) uid=-1

Sep 21 20:29:17 db0alg citserver[8069]: citserver[8069]: user_ops: bad password specified for <> Service <SMTP-MTA> Port <26> Remote <192.168.2.128 / 192.168.2.128>

Sep 21 20:29:17 db0alg citserver[8069]: user_ops: bad password specified for <> Service <SMTP-MTA> Port <26> Remote <192.168.2.128 / 192.168.2.128>

Sep 21 20:29:17 db0alg citserver[8069]: citserver[8069]: SMTP: client disconnected: ending session.

Sep 21 20:29:17 db0alg citserver[8069]: citserver[8069]: context: [231]SRV[SMTP-MTA] Session ended.

Sep 21 20:29:17 db0alg citserver[8069]: SMTP: client disconnected: ending session.

Sep 21 20:29:17 db0alg citserver[8069]: context: [231]SRV[SMTP-MTA] Session ended.

 

Any idea? And yes, username and password are correct, i can login with theese credentials via webcit with no problem. I can also send e-mails via webcit, but have no luck with external clients. Another old installation of Citadel works with no problems, using same client.

System is a RaspberryPI 4 and Debian Buster.

 

 


[#] Tue Sep 21 2021 19:08:17 EDT from michael

Subject: SMTP authentication fails, POP3 ok...

[Reply] [ReplyQuoted] [Headers] [Print]

Hi,

i installed Citadel via easy-install. Everything works fine, i can receive e-mails via pop3 port 110. But when i try to send e-mails via smpt port 25 or in my case port 26 (changed the port via webcit) i get an authentication failure:

Sep 21 20:29:17 db0alg citserver[8069]: citserver[8069]: context: session (SMTP-MTA) started from 192.168.2.128 (192.168.2.128) uid=-1

Sep 21 20:29:17 db0alg citserver[8069]: context: session (SMTP-MTA) started from 192.168.2.128 (192.168.2.128) uid=-1

Sep 21 20:29:17 db0alg citserver[8069]: citserver[8069]: user_ops: bad password specified for <> Service <SMTP-MTA> Port <26> Remote <192.168.2.128 / 192.168.2.128>

Sep 21 20:29:17 db0alg citserver[8069]: user_ops: bad password specified for <> Service <SMTP-MTA> Port <26> Remote <192.168.2.128 / 192.168.2.128>

Sep 21 20:29:17 db0alg citserver[8069]: citserver[8069]: SMTP: client disconnected: ending session.

Sep 21 20:29:17 db0alg citserver[8069]: citserver[8069]: context: [231]SRV[SMTP-MTA] Session ended.

Sep 21 20:29:17 db0alg citserver[8069]: SMTP: client disconnected: ending session.

Sep 21 20:29:17 db0alg citserver[8069]: context: [231]SRV[SMTP-MTA] Session ended.

 

Any idea? And yes, username and password are correct, i can login with theese credentials via webcit with no problem. I can also send e-mails via webcit, but have no luck with external clients. Another old installation of Citadel works with no problems, using same client.

System is a RaspberryPI 4 and Debian Buster.

 

 


[#] Wed Sep 22 2021 13:54:47 EDT from IGnatius T Foobar

Subject: Re: SMTP authentication fails, POP3 ok...

[Reply] [ReplyQuoted] [Headers] [Print]

Maybe if you post it a fourth time someone will answer?

Please advise what SMTP client software you are using, and what SASL method it is using (LOGIN, PLAIN, etc).

Also try port 587 instead of port 25.

[#] Wed Sep 22 2021 15:05:42 EDT from michael

Subject: Re: SMTP authentication fails, POP3 ok...

[Reply] [ReplyQuoted] [Headers] [Print]

I am using Microsoft Outlook as a client, also tryed other ones but no luck.

Auth is plain, no spa/ssl/tls. I also tested with port 587, same problem....i have no idea anymore.

 



[#] Wed Sep 22 2021 18:24:47 EDT from Silverfoxe

Subject: email

[Reply] [ReplyQuoted] [Headers] [Print]

I just performed an easyinstall  on a virgin pi 3 with debian buster.

Am having issues with email contact settings and noticed display_reg?suppress_email=1 with no email information if I change email=0 looks like the information is available but isn't; anybody else have this issue?

I can locally email between primary accounts but not aliases.

this situation has happened with the current software on various pi operating systems including ubuntu server and manjaro, is anybody else having issues?

btw - working with my isp to resolved port 25 issues that appear to be connected to the router.

I've used citadel in the past without fail so I would like to get back to the application.

any help would be appreciated!

 



[#] Fri Sep 24 2021 17:58:05 EDT from JanDenOuden

Subject: Re: Citadel contineously crashing and restarting

[Reply] [ReplyQuoted] [Headers] [Print]

I did the database cleanup job. I expected a lengthy job, but it finished in only 2 seconds or so (database more than 2 GB).

For 1 or 2 minutes it looked OK. But then I got the crashes/restarts again, same error code 105.

Meanwhile, I have created a new citadel docker container, and did a new copy from my old NAS. Now with another tool, imapsync. This has been running now for 2 days, and looks good.

Thanks for you assistance in this. Using Citadel just for free as a private user, I appreciate the prompt help.

 

 



[#] Wed Sep 29 2021 07:09:22 EDT from xx1182

Subject: Easy Install witouth Systemd

[Reply] [ReplyQuoted] [Headers] [Print]

Hi, i've tried the EasyInstall method, and it says:

systemd was not found

cause even tho it is Debian my init system is not Systemd.

 

So according to the wiki, and the installer i'm supposed to go to /usr/local/citadel/setup, but it doesn't work, since setup tries to connect to a server.



[#] Wed Sep 29 2021 08:50:17 EDT from xx1182

Subject: Re: Easy Install witouth Systemd

[Reply] [ReplyQuoted] [Headers] [Print]

Well, i managed to just run "citserver" and then setup, i suppose that's the only binary that is needed to run, but how do i change the default ports?



[#] Wed Sep 29 2021 09:15:54 EDT from IGnatius T Foobar

Subject: Re: Easy Install witouth Systemd

[Reply] [ReplyQuoted] [Headers] [Print]

You are correct about the Easy Install system requiring systemd to automatically start Citadel, and you are also correct about just running the citserver binary using whatever local method you're using.

To change the default ports, log in to any client. You can use the console mode client (citadel) if you want to. But you probably want the web client (WebCit), which is another server binary found in /usr/local/webcit/webcit.

[#] Wed Sep 29 2021 09:26:42 EDT from xx1182

Subject: Re: Easy Install witouth Systemd

[Reply] [ReplyQuoted] [Headers] [Print]

Very, VERY VERY NICE. It's all integrated, i've actually found the ports way back, but i tought, they were referring to the "webcit client" ports, and i didn't know it would actually change ports.

 

VERY VERY NICE. Regards.



[#] Wed Sep 29 2021 13:49:12 EDT from leemon

Subject: managesieve port

[Reply] [ReplyQuoted] [Headers] [Print]

Hi,

it seems managesieve port is not saved in [Administration -> Edit site-wide configuration -> SMTP], it's always "0", at least in the latest docker container.

 



[#] Thu Sep 30 2021 00:49:14 EDT from lambda

Subject: FreeBSD Scripts

[Reply] [ReplyQuoted] [Headers] [Print]

Can someone link the FreeBSD scripts that were at http://fleeb.com/Citadel/
namely webcit.sh and citserver.sh

Thanks!

 



[#] Thu Sep 30 2021 05:50:30 EDT from wintpe

[Reply] [ReplyQuoted] [Headers] [Print]

Hi Everyone

been using citadel for about 7 years now on the old rpm 8.xx version under centos 7

ive now upgraded to rocky linux 8 and installed the docker version from your downloads. (9.3)

the citadel.key and csr dont appear to have been created and in /usr/local/citadel/keys are just links to /citadel-data , which i see is under the docker virtual mount but again no files

in the target location.

is there a way to regenerate the keys. is my o/s install missing something, (its a default install) that caused the docker run to not produce the keys?

the documentation suggests restarting, which hasnt worked, or running the openssl command, but with no citadel.key that will not work.

any help appreciated.

regards peter 



[#] Thu Sep 30 2021 18:00:12 EDT from wintpe

[Reply] [ReplyQuoted] [Headers] [Print]

ok so i realised my mistake, in reading the doc on keys and have successfully generated the 3 for citadel and 3 for webcit, but 

still ssl connections dont work via webcit or 993/143, 587

any pointers in where to check would be apreciated.

im not using externaly signed certs, but im happy to use thunderbird in non strict conections.

everything is working fine in non secure mode by the way.

regards peter



[#] Fri Oct 01 2021 05:52:12 EDT from wintpe

Subject: Re: Docker container of Citadel is now ready to download

[Reply] [ReplyQuoted] [Headers] [Print]

 

Sat Aug 21 2021 19:08:24 EDT from IGnatius T Foobar Subject: Docker container of Citadel is now ready to download

Docker images are ready for testing :)

Go to https://www.citadel.org/docker.html to learn more. So far, this is working way better than the AppImage distribution was, and most of the work we did on that has translated very nicely to the container. It's extremely stable and should be compatible with any host system on which Docker will run.

We have 64-bit AMD/Intel and 32-bit ARM containers available.

It is currently considered a test build, but our intention is to make it the primary way people run the Citadel system, both on your own hardware and in the cloud.

hi, i posted a couple of messages in the support forum, re the docker images.

the download site did not mension it was for testing only, or maybe it was not obvious.

i have no prob running on test release if it works though so moving on.....

im now running the docker image as my home system, and its very stable, only thing that did not work, and whats not 

obvious , a way to fix was the generation of the keys.

 

im running it on rocky linux 8, essentialy centos/redhat.

 

i ran the three openssl commands to generatev the 3 keys for webcit and citadel in the citadel-data directory, and restarted

 

but i still cant enable non strict ssl or starttls on thunderbird or access webcit through https, whereas i could on my old citadel 8 rpm version.

any pointers?

 

regards peter

 



[#] Fri Oct 01 2021 14:08:20 EDT from IGnatius T Foobar

Subject: Re: Easy Install witouth Systemd

[Reply] [ReplyQuoted] [Headers] [Print]

Very, VERY VERY NICE. It's all integrated, i've actually found the
ports way back, but i tought, they were referring to the "webcit
client" ports, and i didn't know it would actually change ports.

Correct. WebCit doesn't speak to Citadel Server using all those ports. It speaks to Citadel Server either on port 504 or on a unix domain socket.
That screen in WebCit configures the ports that Citadel Server listens on for all those protocols.

[#] Fri Oct 01 2021 14:08:47 EDT from IGnatius T Foobar

Subject: Re: managesieve port

[Reply] [ReplyQuoted] [Headers] [Print]

it seems managesieve port is not saved in [Administration -> Edit
site-wide configuration -> SMTP], it's always "0", at least in the
latest docker container.

managesieve is no longer supported because Citadel no longer uses Sieve.

[#] Fri Oct 01 2021 14:09:45 EDT from IGnatius T Foobar

[Reply] [ReplyQuoted] [Headers] [Print]

ok so i realised my mistake, in reading the doc on keys and have
successfully generated the 3 for citadel and 3 for webcit, but 

still ssl connections dont work via webcit or 993/143, 587

When you generate new key and certificate, you need to give them the same file names as the automatically generated ones, and then restart the server.

[#] Sat Oct 02 2021 09:49:31 EDT from leemon

Subject: Re: managesieve port

[Reply] [ReplyQuoted] [Headers] [Print]

 

Fri Oct 01 2021 14:08:47 EDT from IGnatius T Foobar Subject: Re: managesieve port
it seems managesieve port is not saved in [Administration -> Edit
site-wide configuration -> SMTP], it's always "0", at least in the
latest docker container.

managesieve is no longer supported because Citadel no longer uses Sieve.

Ah, thanx! :)



[#] Mon Oct 04 2021 09:42:24 EDT from cfriend

Subject: Ongoing issue with Citserver crashing

[Reply] [ReplyQuoted] [Headers] [Print]

Good morning,

My Citserver keeps crashing intermittently and taking the database with it.  I ran for years on CentOS 5 with no trouble but every since I moved to Ubuntu 18 and then 20 I've had DB corruption issues.  dbrecover and other database cleanup tools do not solve the corruption in this case, it seems to obliterate cdb.02 completely when it dies.

I have had this happen several times over the past year, and each time my database my corrupted beyond repair and I have to restore a backup or delete the database, reconfig, and retransfer mail from my mail program (this is a personal mail server so thankfully only two users).  This time before I restored I went searching through logs and found the entries below, looks like libssl was involved.  Any ideas?  Nothing abnormal above the crash, just normal IMAP connections from my mail client.

Oct  3 04:55:52 nadia kernel: [2314146.493749] citserver[43094]: segfault at 30 ip 00007f87953bd744 sp 00007f87916259c8 error 4 in libssl.so.1.1[7f879539d000+4f000]
Oct  3 04:55:52 nadia kernel: [2314146.493761] Code: 38 01 00 00 00 c7 47 44 00 00 00 00 e8 55 23 01 00 48 8b 45 08 48 89 ef 48 8b 40 28 48 89 45 30 5d e9 00 fa ff ff f3 0f 1e fa <48> 83 7f 30 00 74 05 e9 f0 e5 ff ff 48 83 ec 18 48 89 7c 24 08 e8
Oct  3 04:55:52 nadia systemd[1]: citadel.service: Maingv process exited, code=killed, status=11/SEGV
Oct  3 04:55:52 nadia systemd[1]: citadel.service: Failed with result 'signal'.
Oct  3 04:55:52 nadia systemd[1]: citadel.service: Scheduled restart job, restart counter is at 9.
Oct  3 04:55:52 nadia systemd[1]: Stopped Citadel Server.
Oct  3 04:55:52 nadia systemd[1]: Started Citadel Server.
Oct  3 04:55:53 nadia citserver:
Oct  3 04:55:53 nadia citserver:
Oct  3 04:55:53 nadia citserver: *** Citadel server engine ***
Oct  3 04:55:53 nadia citserver: Version 931 (build 100b6a90d) ***
Oct  3 04:55:53 nadia citserver: Copyright (C) 1987-2021 by the Citadel development team.
Oct  3 04:55:53 nadia citserver:
Oct  3 04:55:53 nadia citserver: This program is open source software: you can redistribute it and/or
Oct  3 04:55:53 nadia citserver: modify it under the terms of the GNU General Public License, version 3.
Oct  3 04:55:53 nadia citserver:
Oct  3 04:55:53 nadia citserver: This program is distributed in the hope that it will be useful,
Oct  3 04:55:53 nadia citserver: but WITHOUT ANY WARRANTY; without even the implied warranty of
Oct  3 04:55:53 nadia citserver: MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
Oct  3 04:55:53 nadia citserver: GNU General Public License for more details.
Oct  3 04:55:53 nadia citserver:
Oct  3 04:55:53 nadia citserver: libcitadel(unnumbered)
Oct  3 04:55:53 nadia citserver: main: running in data directory /usr/local/citadel
Oct  3 04:55:53 nadia citserver[43903]: citserver[43903]: Checking directory access
Oct  3 04:55:53 nadia citserver[43903]: Checking directory access
Oct  3 04:55:53 nadia citserver[43903]: citserver[43903]: Opening databases
Oct  3 04:55:53 nadia citserver[43903]: Opening databases
Oct  3 04:55:53 nadia citserver[43903]: citserver[43903]: db: mounting databases
Oct  3 04:55:53 nadia citserver[43903]: citserver[43903]: Initializing configuration system
Oct  3 04:55:53 nadia citserver[43903]: Initializing configuration system
Oct  3 04:55:53 nadia citserver[43903]: citserver[43903]: Creating base rooms (if necessary)
Oct  3 04:55:53 nadia citserver[43903]: Creating base rooms (if necessary)
Oct  3 04:55:53 nadia citserver[43903]: citserver[43903]: Seeding the pseudo-random number generator...
Oct  3 04:55:53 nadia citserver[43903]: Seeding the pseudo-random number generator...
Oct  3 04:55:53 nadia citserver[43903]: citserver[43903]: control: sanity checking the recorded highest message and room numbers
Oct  3 04:55:53 nadia citserver[43903]: control: sanity checking the recorded highest message and room numbers
Oct  3 04:55:53 nadia citserver[43903]: citserver[43903]: db: cdb_fetch(4): BDB0075 DB_PAGE_NOTFOUND: Requested page not found
Oct  3 04:55:53 nadia citserver[43903]: db: cdb_fetch(4): BDB0075 DB_PAGE_NOTFOUND: Requested page not found
Oct  3 04:55:53 nadia systemd[1]: citadel.service: Main process exited, code=exited, status=105/n/a
Oct  3 04:55:53 nadia systemd[1]: citadel.service: Failed with result 'exit-code'.
Oct  3 04:55:54 nadia systemd[1]: citadel.service: Scheduled restart job, restart counter is at 10.
Oct  3 04:55:54 nadia systemd[1]: Stopped Citadel Server.
Oct  3 04:55:54 nadia systemd[1]: Started Citadel Server.

etc... If restarted over and over again and finally gave up.



Go to page: First ... 20 21 22 23 [24] 25 26 27