Language:
switch to room list switch to menu My folders
Go to page: First ... 7 8 9 10 [11] 12 13 14 15 ... Last
[#] Thu Sep 21 2017 20:12:35 EDT from danbob @ Uncensored

Subject: insecure user/pass while creating new users or returning users

[Reply] [ReplyQuoted] [Headers] [Print]

I set up Citadel on my server and it works great but firefox gives a little drop-down from the text box that says "This connection is not secure. Logins entered here could be compromised." I have an ssl cert for the site. Can I use this to enable ssl on the Citadel webcit server?

On a side note it says the same thing when you put in form info here on this BBS.

-Dan

 



[#] Thu Sep 21 2017 23:29:20 EDT from IGnatius T Foobar @ Uncensored

Subject: Re: Centos Server install type

[Reply] [ReplyQuoted] [Headers] [Print]

Centos 7 build and installing a Minimal server, it all goes well
until the end, then it reboots and zip, nada... I can't get to the

CentOS 7 uses systemd, and Citadel is going to install sysvinit scripts ... a lot of software is experiencing the same problem right now; systemd "supposedly" is set up to honor sysvinit scripts, but in practice it doesn't, at least not on CentOS.

I just went through this problem with vCloud Director. Ugh.

Try these commands to start it up:

/etc/init.d/citadel start
/etc/init.d/webcit start

[#] Fri Sep 22 2017 13:08:27 EDT from bravegnu @ Uncensored

Subject: getcontenttype in PROPFIND

[Reply] [ReplyQuoted] [Headers] [Print]

When a PROPFIND is issued on a GroupDAV collection like corresponding to an addressbook like http://server/groupdav/Contacts/ the server returns a Multi-Status response. In the returned XML payload, the D:getcontenttype tag is located within the D:response tag. But as per the WebDAV specification this should appear within the D:prop tag. Examples are shown below:

The current response looks like the below.

<D:response>
<D:href>
http://server/groupdav/room/uid
</D:href>
<D:getcontenttype>text/x-vcard</D:getcontenttype>
<D:propstat>
<D:status>HTTP/1.1 200 OK</D:status>
<D:prop>
<D:getetag>"1"</D:getetag>
<D:getlastmodified>
...
</D:getlastmodified>
</D:prop>
</D:propstat>
</D:response>

But the expected response as per WebDAV specification

<D:response>
<D:href>
http://server/groupdav/room/uid
</D:href>
<D:propstat>
<D:status>HTTP/1.1 200 OK</D:status>
<D:prop>
<D:getetag>"1"</D:getetag>
<D:getcontenttype>text/x-vcard</D:getcontenttype>
<D:getlastmodified>
...
</D:getlastmodified>
</D:prop>
</D:propstat>
</D:response>

The difference in the location of D:getcontenttype tag causes Inverse SOGo Connector's Contacts support to fail. It will be great if we can have this fixed in Citadel.

Regards,
Vijay



[#] Sat Sep 23 2017 10:53:22 EDT from enricorizzo @ Uncensored

Subject: Citadel Install Error...

[Reply] [ReplyQuoted] [Headers] [Print]

While installing Libcitadel and several lib/files, the stringbuf.c causes many errrors ending with the following message.

I can't find information on these lib/files to find the files or check the contents of stringbuf .

How can I find the correct way to fix this?

The install log file is attached. Thanks.

------------------------------------

lib/stringbuf.c:3142:39: error: request for member 'avail_in' in something not a structure or union
     In->Buf->BufUsed = stream->zstream.avail_in;
                                       ^
lib/stringbuf.c:3149:41: error: request for member 'avail_in' in something not a structure or union
      (In->Buf->BufUsed - stream->zstream.avail_in);
                                         ^
Makefile:168: recipe for target 'lib/stringbuf.lo' failed
make: *** [lib/stringbuf.lo] Error 1
Operating system: Linux Debian 9.1 ( 4.9.0-3-amd64 x86_64)



citadel-install-log.txt (text/plain, 31137 bytes) [View| Download]
[#] Mon Sep 25 2017 22:39:01 EDT from kcactc @ Uncensored

Subject: Re: Citadel Install Error...

[Reply] [ReplyQuoted] [Headers] [Print]

I am getting the same error.

lib/stringbuf.c:3142:39: error: request for member 'avail_in' in something not a structure or union
     In->Buf->BufUsed = stream->zstream.avail_in;
                                       ^
lib/stringbuf.c:3149:41: error: request for member 'avail_in' in something not a structure or union
      (In->Buf->BufUsed - stream->zstream.avail_in);
                                         ^
Makefile:168: recipe for target 'lib/stringbuf.lo' failed
make: *** [lib/stringbuf.lo] Error 1
Operating system: Linux Debian 9.1 ( 4.9.0-3-amd64 x86_64)

my log attached as well.

Errors occurred running Easy Install

 

 



citadel-install-log.txt (text/plain, 31141 bytes) [View| Download]
[#] Mon Sep 25 2017 22:43:56 EDT from kcactc @ Uncensored

Subject: Re: Citadel Install Error...

[Reply] [ReplyQuoted] [Headers] [Print]

install seems to go wrong in the same place in both log files:

 

LTCompile: /bin/bash ./libtool --silent --mode=compile gcc -I./lib -I. -g -O2 -Wall -Wmissing-prototypes -Wstrict-prototypes -fexceptions -D HAVE_MMAP -o buildinfo -c

CC: lib/libcitadel.c
CC: lib/mime_parser.c
CC: lib/tools.c
CC: lib/vcard.c
CC: lib/vnote.c
CC: lib/hash.c
CC: lib/lookup3.c
CC: lib/stringbuf.c
lib/stringbuf.c:2846:2: error: unknown type name 'z_stream'
z_stream zstream;
^~~~~~~~
lib/stringbuf.c: In function 'StrBufNewStreamContext':
lib/stringbuf.c:2873:9: warning: implicit declaration of function 'inflateInit' [-Wimplicit-function-declaration]
err = inflateInit(&stream->zstream);
^~~~~~~~~~~

 



[#] Mon Sep 25 2017 23:20:31 EDT from enricorizzo @ Uncensored

Subject: Citadel Install Error... Stringbuf.c of Libcitadel

[Reply] [ReplyQuoted] [Headers] [Print]

Regarding the Install error with file Stringbuf.c:

I found the file by downloading and extracting libcitadel-easyinstall.tar.gz. from http://www.citadel.org/doku.php/installation:source.

This contains the Stringbuf.c and related files.

An attempt to compile Stringbuf.c has the same errors.The next file in line Wildfire.c seemed to work better.

 

The compiler was obtained by using the command in prerequisites for Debian and Ubuntu systems.

http://www.citadel.org/doku.php/installation:easyinstall:prereq-debian.html

apt-get install build-essential curl g++ gettext shared-mime-info libssl-dev

I believe this used the Debian 9 install CD.

I am not able to troubleshoot C programs, but research shows different compilers may provide different results, some with errors.

 

 



 



citadel-install-log.txt (text/plain, 31137 bytes) [View| Download]
[#] Tue Sep 26 2017 06:11:11 EDT from bravegnu @ Uncensored

Subject: Incorrect SMTP Dot Stuffing

[Reply] [ReplyQuoted] [Headers] [Print]

According to SMTP RFC 5321 https://tools.ietf.org/html/rfc5321#section-4.5.2

To allow all user composed text to be transmitted transparently, the following procedures are used:

  • Before sending a line of mail text, the SMTP client checks the first character of the line. If it is a period, one additional period is inserted at the beginning of the line.
  • When a line of mail text is received by the SMTP server, it checks the line. If the line is composed of a single period, it is treated as the end of mail indicator. If the first character is a period and there are other characters on the line, the first character is delete

The server side implementation of the de-stuffing is not correctly handled in Citadel. This causes dot duplication in lines that start with a dot. The relevant code from msgbase.c is shown below.

			if ((dotdot) &&
			    (StrLength(LineBuf) == 2) && 
			    (!strcmp(ChrPtr(LineBuf), "..")))
			{
				StrBufCutLeft(LineBuf, 1);
			}
			

Here we check if the line length is equal to 2. But the line length will never be 2, since the line includes the EOL character as well. Moreover the comparison with ".." is also incorrect. Also the spec specifies that the dot stuffing will be done for all lines, that start with a dot, not just lines that contain only a dot.

A condition check that matches the RFC is shown below.

if ((dotdot) &&
    (StrLength(LineBuf) > 1) &&
    (ChrPtr(LineBuf)[0] == '.'))

Please do let us know what you thinks about this.

Regards,

Vijay



[#] Thu Sep 28 2017 06:00:11 EDT from bodil @ Uncensored

Subject: server restarted now it won't give me accessto webinterface

[Reply] [ReplyQuoted] [Headers] [Print]

plase help

i have restartet my citadelserver from the administration panel now i cant get into the web interface and give this error in my browswer This program was unable to connect or stay connected to the Citadel server. Please report this problem to your system administrator.

Read More... 

 

i think that   the problems must be some services that are not restarting  while i have ssh to the linux box

 

how to find and restart the  approited services ? and fix the problems 

 

citadel is running on ubuntu server 14.04 

 

i have tryede and wil be searhing 

sudo /etc/init.d/webcit  start stop 

sudo /etc/init.d/citadel  start stop

and tryed and the scrib fom  centos OS  



[#] Thu Sep 28 2017 13:48:45 EDT from bennabiy @ Uncensored

Subject: Re: server restarted now it won't give me accessto webinterface

[Reply] [ReplyQuoted] [Headers] [Print]

I would recommend rerunning the citadel setup (not install, just setup). It seems you might be experiencing the citserver resetting its port to 0.

 

 

Thu Sep 28 2017 06:00:11 AM EDT from bodil @ Uncensored Subject: server restarted now it won't give me accessto webinterface

plase help

i have restartet my citadelserver from the administration panel now i cant get into the web interface and give this error in my browswer This program was unable to connect or stay connected to the Citadel server. Please report this problem to your system administrator.

Read More... 

 

i think that   the problems must be some services that are not restarting  while i have ssh to the linux box

 

how to find and restart the  approited services ? and fix the problems 

 

citadel is running on ubuntu server 14.04 

 

i have tryede and wil be searhing 

sudo /etc/init.d/webcit  start stop 

sudo /etc/init.d/citadel  start stop

and tryed and the scrib fom  centos OS  



 



[#] Fri Sep 29 2017 07:29:08 EDT from Aleksas @ Uncensored

Subject: I need some help with SSL/TLS encryption

[Reply] [ReplyQuoted] [Headers] [Print]

Hi, my website is running on https, I have all the required files, so how do I enable TLS/SSL encryption in citadel ?



[#] Fri Sep 29 2017 07:32:33 EDT from Aleksas @ Uncensored

[Reply] [ReplyQuoted] [Headers] [Print]

For sending messages over SMTP



[#] Fri Sep 29 2017 10:28:19 EDT from bennabiy @ Uncensored

Subject: Re: I need some help with SSL/TLS encryption

[Reply] [ReplyQuoted] [Headers] [Print]

First step would be to put the certificates in place. There are 6 files (3 of which can be links) ~citadel/keys/citadel.{cer,csr,key} which can be replaced with your own files, and those handle SSL/TLS for the communications with IMAP, POP and SMTP etc. Then there is a keys/ folder in the webcit folder (easy install would put it at /usr/local/webcit/keys/) which takes a link by the name webcit.{cer,csr,key} or you can have its own cert there. That handles SSL/TLS for web interface HTTPS.

 

Hope that helps!

Fri Sep 29 2017 07:29:08 AM EDT from Aleksas @ Uncensored Subject: I need some help with SSL/TLS encryption

Hi, my website is running on https, I have all the required files, so how do I enable TLS/SSL encryption in citadel ?



 



[#] Fri Sep 29 2017 21:09:18 EDT from kcactc @ Uncensored

Subject: Re: Citadel Install Error... Stringbuf.c of Libcitadel

[Reply] [ReplyQuoted] [Headers] [Print]

enricorizzo, did you ever find any resolution to the Stringbuf.c issue?

I have not.

 


citadel-install-log.txt (text/plain, 31137 bytes) [View| Download]
[#] Sun Oct 01 2017 00:41:51 EDT from enricorizzo @ Uncensored

Subject: Re: Citadel Install Error... Stringbuf.c of Libcitadel

[Reply] [ReplyQuoted] [Headers] [Print]

 

I have not found any answers for this.

I have tried compiling this on two different machines with the same results.

I have searched for Citadel archives that might contain an older version of Stringbuf.c, but I have not found any.

***************************************************************************

lib/stringbuf.c:3142:39: error: request for member 'avail_in' in something not a structure or union
     In->Buf->BufUsed = stream->zstream.avail_in;
                                       ^
lib/stringbuf.c:3149:41: error: request for member 'avail_in' in something not a structure or union
      (In->Buf->BufUsed - stream->zstream.avail_in);
                                         ^
Makefile:168: recipe for target 'lib/stringbuf.lo' failed
make: *** [lib/stringbuf.lo] Error 1
Operating system: Linux Debian 9.1 ( 4.9.0-3-amd64 x86_64)



citadelinstalllog0930.txt (text/plain, 31137 bytes) [View| Download]
[#] Sun Oct 01 2017 14:32:12 EDT from citadel4dje @ Uncensored

Subject: Secure mailserver?? - privacy??

[Reply] [ReplyQuoted] [Headers] [Print]

In these days of privacy concerns being an issue. How is Citadel in this area? Is it on the beat when it comes to this?

What about the email front end? Fully secure??


Basically is Citadel as secure as Protonmail?

If not yet...anything you guys are going to implement in future?



[#] Sun Oct 01 2017 22:55:29 EDT from vhero @ Uncensored

Subject: Citadel Easy Install is aborting.

[Reply] [ReplyQuoted] [Headers] [Print]

Hello, I've been trying to find a easy to install mail-server for linux, and i ran into Citadel.

I went with the easy install process, http://www.citadel.org/doku.php/installation:easyinstall:easyinstall

Everything was going great via the following command:  wget -q -O - http://easyinstall.citadel.org/install | sh

This was until I got to this section:

* Downloading Citadel...

* Installing Citadel...

* Performing Citadel install...

It gave me the dreaded "Install is aborting" .. I'm not sure why and I cannot personally tell via the log txt. (Not a Linux Junky)

I've installed Citadel manually but it still comes up with the same abortion message. Any help would be helpful! Thank you!

[url=citadel-install-log.txt]https://www.upload.ee/download/7516401/e36d320eafec1258425e/citadel-install-log.txt[/url]

Command-Line Image

(Skype Info - live:vr-rp.hero)



[#] Mon Oct 02 2017 01:46:46 EDT from enricorizzo @ Uncensored

Subject: Re: Citadel Easy Install is aborting.

[Reply] [ReplyQuoted] [Headers] [Print]

 

I have the same issue. See above posts. It seems the file causing the error is Stringbuf.c.

I found the file by downloading and extracting libcitadel-easyinstall.tar.gz. from http://www.citadel.org/doku.php/installation:source.

This contains the Stringbuf.c and related files.

An attempt to compile Stringbuf.c by itself has the same errors.The next file in line Wildfire.c seemed to work better.

I have tried this with another compiler with the same results.

I believe there is an error in Stringbuf.c.

I believe this is the correct forum to report this.



[#] Mon Oct 02 2017 01:54:22 EDT from enricorizzo @ Uncensored

Subject: Re: Citadel Easy Install is aborting.

[Reply] [ReplyQuoted] [Headers] [Print]

After looking at your log file I see you have a different issue than I had.

 



[#] Mon Oct 02 2017 10:02:41 EDT from bennabiy @ Uncensored

Subject: Re: Citadel Easy Install is aborting.

[Reply] [ReplyQuoted] [Headers] [Print]

This looks like you are missing some of the dependencies. 

 

Make sure you do:    

apt-get install build-essential curl g++ gettext shared-mime-info libssl-dev

 

Sun Oct 01 2017 10:55:29 PM EDT from vhero @ Uncensored Subject: Citadel Easy Install is aborting.

Hello, I've been trying to find a easy to install mail-server for linux, and i ran into Citadel.

I went with the easy install process, http://www.citadel.org/doku.php/installation:easyinstall:easyinstall

Everything was going great via the following command:  wget -q -O - http://easyinstall.citadel.org/install | sh

This was until I got to this section:

* Downloading Citadel...

* Installing Citadel...

* Performing Citadel install...

It gave me the dreaded "Install is aborting" .. I'm not sure why and I cannot personally tell via the log txt. (Not a Linux Junky)

I've installed Citadel manually but it still comes up with the same abortion message. Any help would be helpful! Thank you!

[url=citadel-install-log.txt]https://www.upload.ee/download/7516401/e36d320eafec1258425e/citadel-install-log.txt[/url]

Command-Line Image

(Skype Info - live:vr-rp.hero)



 



Go to page: First ... 7 8 9 10 [11] 12 13 14 15 ... Last