Language:
switch to room list switch to menu My folders
Go to page: First ... 19 20 21 22 [23] 24 25 26 27 ... Last
[#] Thu Jul 13 2017 10:48:42 EDT from athos-mn @ Uncensored

[Reply] [ReplyQuoted] [Headers] [Print]

I'll probably give it a go once it hits the queasy install - but I wouldn't be a good tester at this stage. Thanks for working on it, though!



[#] Fri Jul 14 2017 04:15:40 EDT from janik @ Uncensored

Subject: Re: send Emails error 551 relaying denied

[Reply] [ReplyQuoted] [Headers] [Print]

 

Mon Jul 10 2017 21:13:12 EDT from IGnatius T Foobar @ Uncensored
i can send emails but not receive. error is 551 relaying denied..

what could i do?

First make sure it's actually Citadel that's listening on port 25 of your server. Telnet to port 25, and you should see something like

220 uncensored.citadel.org ESMTP Citadel server ready.

If it doesn't say "Citadel" somewhere in the greeting, you have another mail server running, and it needs to be shut off.

Hi IGnatius,

 

I've tested this several times and it shows Citadel. Also sending mails via telnet is ok.

So Citadel is the only application on my port 25 :(

 

Do you have any further steps for me ? :)

 

Thanks!



[#] Fri Jul 14 2017 08:45:33 EDT from bennabiy @ Uncensored

Subject: Re: send Emails error 551 relaying denied

[Reply] [ReplyQuoted] [Headers] [Print]

Check to make sure you have proper MX records at the DNS level, and that you have properly set the domains to which citadel should be the recipient...  

Fri Jul 14 2017 04:15:40 AM EDT from janik @ Uncensored Subject: Re: send Emails error 551 relaying denied

 

Mon Jul 10 2017 21:13:12 EDT from IGnatius T Foobar @ Uncensored
i can send emails but not receive. error is 551 relaying denied..

what could i do?

First make sure it's actually Citadel that's listening on port 25 of your server. Telnet to port 25, and you should see something like

220 uncensored.citadel.org ESMTP Citadel server ready.

If it doesn't say "Citadel" somewhere in the greeting, you have another mail server running, and it needs to be shut off.

Hi IGnatius,

 

I've tested this several times and it shows Citadel. Also sending mails via telnet is ok.

So Citadel is the only application on my port 25 :(

 

Do you have any further steps for me ? :)

 

Thanks!



 



[#] Fri Jul 14 2017 09:21:26 EDT from IGnatius T Foobar @ Uncensored

Subject: Re: send Emails error 551 relaying denied

[Reply] [ReplyQuoted] [Headers] [Print]

Do you have your domain names set properly in the system configuration?



[#] Sun Jul 16 2017 01:09:02 EDT from janik @ Uncensored

Subject: Re: send Emails error 551 relaying denied

[Reply] [ReplyQuoted] [Headers] [Print]

 

Fri Jul 14 2017 09:21:26 EDT from IGnatius T Foobar @ Uncensored Subject: Re: send Emails error 551 relaying denied

Do you have your domain names set properly in the system configuration?



I'm sorry to say, I hat a little spelling mistake in my "local-host-names" file *embarrassing* ..

 

Sorry for wasting time and Thanks for helping! :)



[#] Sun Jul 16 2017 09:18:20 EDT from bennabiy @ Uncensored

Subject: Re: send Emails error 551 relaying denied

[Reply] [ReplyQuoted] [Headers] [Print]

As long as you got it fixed, it was not a waste of time... Now if you found the mistake and didn't do anything, that would be a waste.

Sun Jul 16 2017 01:09:02 AM EDT from janik @ Uncensored Subject: Re: send Emails error 551 relaying denied

 

Fri Jul 14 2017 09:21:26 EDT from IGnatius T Foobar @ Uncensored Subject: Re: send Emails error 551 relaying denied

Do you have your domain names set properly in the system configuration?



I'm sorry to say, I hat a little spelling mistake in my "local-host-names" file *embarrassing* ..

 

Sorry for wasting time and Thanks for helping! :)



 



[#] Sun Jul 16 2017 14:20:00 EDT from IGnatius T Foobar @ Uncensored

Subject: Re: send Emails error 551 relaying denied

[Reply] [ReplyQuoted] [Headers] [Print]

We're happy to help you find the right place to troubleshoot. Thanks for reporting the fix.

[#] Sun Jul 16 2017 18:00:37 EDT from Harold Feit @ Uncensored

Subject: Problems after changing some server config

[Reply] [ReplyQuoted] [Headers] [Print]

After changing some server configuration, I now get

citserver[10115]: configuration setting c_port_number is not -1 (disabled) or a valid TCP-Port - check your config! Default setting is: 504

whenever I start the server.

I did not intentionally change whatever setting it was that broke.



[#] Sun Jul 16 2017 21:29:47 EDT from Harold Feit @ Uncensored

Subject: Re: Problems after changing some server config

[Reply] [ReplyQuoted] [Headers] [Print]

re-ran the setup bin to reconfigure, somehow the service port ends up being changed to 0.

Sun Jul 16 2017 18:00:37 EDT from Harold Feit @ Uncensored Subject: Problems after changing some server config

After changing some server configuration, I now get

citserver[10115]: configuration setting c_port_number is not -1 (disabled) or a valid TCP-Port - check your config! Default setting is: 504

whenever I start the server.

I did not intentionally change whatever setting it was that broke.



 



[#] Mon Jul 17 2017 09:40:51 EDT from IGnatius T Foobar @ Uncensored

Subject: Re: Problems after changing some server config

[Reply] [ReplyQuoted] [Headers] [Print]

What version of Citadel Server are you running?  That is a known issue we fixed some time ago.



[#] Mon Jul 17 2017 12:34:47 EDT from warbaby @ Uncensored

Subject: Fix automatically appearring (null) room in Main Floor

[Reply] [ReplyQuoted] [Headers] [Print]

Administration -> Edit Site-Wide Configuration -> Access

"Name of room to log pages"  [(null)]

Change to "Aide", Save. Delete the floor named "(null)"  It should stay gone now. 

Also clarifying this mystery folder is not related to security as was previously imagined. 

 

 

 



[#] Thu Jul 20 2017 06:48:48 EDT from wylekyote @ Uncensored

Subject: DB errror after migration

[Reply] [ReplyQuoted] [Headers] [Print]

I'm needing to migrate my citadel instance from one server to another.

performed an easy-install on the target system

used ./ctdlmigrate   to bring all the data across

 

wait 2 days without email while things oooze across the net -- (Why doesn't ctdlmigrate invoke ssh -C? ) anyway ...

 

after migration  start websit and try to log in as the admin using the migrated credentials

 

citserver segment faults

 

 

restarting citserver results in

root@debian# /usr/local/citadel/citserver
citserver[22990]: 
citserver[22990]: 
citserver[22990]: *** Citadel server engine ***
citserver[22990]: Version 911 (build 3f857d7) ***
citserver[22990]: Copyright (C) 1987-2017 by the Citadel development team.
citserver[22990]: This program is distributed under the terms of the GNU General Public License.
citserver[22990]: 
citserver[22990]: libcitadel(unnumbered)
citserver[22990]: main: creating lockfile
citserver[22990]: master_startup() started
citserver[22990]: Checking directory access
citserver[22990]: Opening databases
citserver[22990]: db: open_databases() starting
citserver[22990]: db: Compiled libdb: Berkeley DB 5.1.29: (October 25, 2011)
citserver[22990]: db:   Linked libdb: Berkeley DB 5.1.29: (October 25, 2011)
citserver[22990]: db:    Linked zlib: 1.2.8
citserver[22990]: db: Setting up DB environment
citserver[22990]: db: dbenv->open(dbenv, /usr/local/citadel/data/, 19091, 0)
citserver[22990]: db: Finding last valid log LSN: file: 1676 offset 863747
citserver[22990]: db: Recovery starting from [1676][862449]
citserver[22990]: db: Recovery complete at Thu Jul 20 09:56:22 2017
citserver[22990]: db: Maximum transaction ID 80000040 Recovery checkpoint [1676][863747]
citserver[22990]: db: mounting databases
citserver[22990]: Initializing configuration system
citserver[22990]: config: setting c_default_cal_zone is empty, but must not - check your config!
citserver[22990]: housekeeping: checking floor reference counts
citserver[22990]: housekeeping: floor 0 has 307 rooms
citserver[22990]: housekeeping: floor 1 has 0 rooms
citserver[22990]: housekeeping: floor 2 has 0 rooms
citserver[22990]: housekeeping: floor 3 has 0 rooms
citserver[22990]: housekeeping: floor 4 has 0 rooms
citserver[22990]: housekeeping: floor 5 has 0 rooms
citserver[22990]: housekeeping: floor 6 has 0 rooms
citserver[22990]: housekeeping: floor 7 has 0 rooms
citserver[22990]: housekeeping: floor 8 has 0 rooms
citserver[22990]: housekeeping: floor 9 has 0 rooms
citserver[22990]: housekeeping: floor 10 has 0 rooms
citserver[22990]: housekeeping: floor 11 has 0 rooms
citserver[22990]: housekeeping: floor 12 has 0 rooms
citserver[22990]: housekeeping: floor 13 has 0 rooms
citserver[22990]: housekeeping: floor 14 has 0 rooms
citserver[22990]: housekeeping: floor 15 has 0 rooms
citserver[22990]: Creating base rooms (if necessary)
citserver[22990]: room_ops: CtdlCreateRoom(name=Lobby, type=0, view=0)
citserver[22990]: room_ops: cannot create room <Lobby> - already exists
citserver[22990]: room_ops: CtdlCreateRoom(name=Aide, type=3, view=0)
citserver[22990]: room_ops: cannot create room <Aide> - already exists
citserver[22990]: room_ops: CtdlCreateRoom(name=Local System Configuration, type=3, view=0)
citserver[22990]: room_ops: cannot create room <Local System Configuration> - already exists
citserver[22990]: room_ops: CtdlCreateRoom(name=Trashcan, type=0, view=0)
citserver[22990]: room_ops: cannot create room <Trashcan> - already exists
citserver[22990]: Seeding the pseudo-random number generator...
citserver[22990]: master_startup() finished
citserver[22990]: control: sanity checking the recorded highest message, user, and room numbers
citserver[22990]: db: cursor still in progress on cdb 02: attempt to write during r/o cursor
citserver[22990]: db: citserver is stopping in order to prevent data loss. uid=0 gid=0 euid=0 egid=0

db_verify thinks all is well

 

Verification of cdb.00 succeeded.
Verification of cdb.01 succeeded.
Verification of cdb.02 succeeded.
Verification of cdb.03 succeeded.
Verification of cdb.04 succeeded.
Verification of cdb.05 succeeded.
Verification of cdb.06 succeeded.
Verification of cdb.07 succeeded.
Verification of cdb.08 succeeded.
Verification of cdb.09 succeeded.
Verification of cdb.0a succeeded.
Verification of cdb.0b succeeded.
Verification of cdb.0c succeeded.
Verification of cdb.0d succeeded.

 

db_recover -c  makes no changes

 

replacing cdb.02 from a backup doesn't help ..  it causes the same error

 

 

 

 



[#] Thu Jul 20 2017 11:19:53 EDT from Christian.Commarmond @ Uncensored

Subject: Big number of messages...

[Reply] [ReplyQuoted] [Headers] [Print]

Hi,

 

Follow up on this subject:

With nearly 300000 messages in a room, I get "Failure: [object Object]" error when I try to open the room. And then, the loading of the messaes seems to take forever. The room with 66000 messages works well.

What can I do?

 

regards,

Christian COMMARMOND

 

 

 

Mon Jul 03 2017 06:28:05 EDT from Christian.Commarmond @ Uncensored Subject: Big number of messages...

Hi,

I installed Citadel and try to synch with my 1,500,000 messages gmail account. (OK, I receive more than 2000 per day, mostly automatized reports).

I try to do the synch with imapsync. It is super slow. I will try soon to do the initial loading from thunderbird.

 

My concern is that, when I go in a folder which contains nearly 200,000 messages, I get the good number at top of screen, but I can only see around 32000 messages (I guess, because I see only to 19th of may 2015). And worse, only the olders...

 

Questions:

Is this normal? Can I override this? Can I get to see the newest messages?

 

Thank you for your help.

 

Christian

 

 



 



[#] Thu Jul 20 2017 11:26:33 EDT from Christian.Commarmond @ Uncensored

Subject: Re: Big number of messages...

[Reply] [ReplyQuoted] [Headers] [Print]

Maybe the databse is too big?

 

The file of data:  24G Jul 19 15:55 cdb.08

 

 

The /var/messages contains:

Jul 20 17:20:51 feux3-citadel_abscom-linux journal: Suppressed 512 messages from /system.slice/citadel.service

Jul 20 17:20:55 feux3-citadel_abscom-linux citserver[684]: msgbase: message 0 appears to be corrupted

Jul 20 17:20:55 feux3-citadel_abscom-linux webcit[981]: HTTP: 200 [0.000964] GET dotskip?room=ALERT_ABSCOM

Jul 20 17:20:55 feux3-citadel_abscom-linux webcit[981]: HTTP: 200 [0.000415] GET /do_template?template=iconbar_user

Jul 20 17:20:55 feux3-citadel_abscom-linux webcit[981]: HTTP: 200 [0.001608] GET /do_template?template=who_iconbar

Jul 20 17:20:55 feux3-citadel_abscom-linux webcit[981]: HTTP: 200 [0.001555] GET /json_roomflr?SortBy=byfloorroom?SortOrder=1

Jul 20 17:21:08 feux3-citadel_abscom-linux webcit[981]: HTTP: 200 [0.000670] GET dotskip?room=ALERT_ABSCOM

Jul 20 17:21:08 feux3-citadel_abscom-linux webcit[981]: HTTP: 200 [0.000228] GET /do_template?template=iconbar_user

Jul 20 17:21:09 feux3-citadel_abscom-linux webcit[981]: HTTP: 200 [0.001026] GET /tasks_inner_html

Jul 20 17:21:09 feux3-citadel_abscom-linux webcit[981]: HTTP: 200 [0.001474] GET /new_messages_html

Jul 20 17:21:09 feux3-citadel_abscom-linux webcit[981]: HTTP: 200 [0.000695] GET /json_roomflr?SortBy=byfloorroom?SortOrder=1

Jul 20 17:21:09 feux3-citadel_abscom-linux webcit[981]: HTTP: 200 [0.000493] GET /calendar_inner_html

Jul 20 17:21:09 feux3-citadel_abscom-linux webcit[981]: HTTP: 200 [0.001050] GET /do_template?template=who_summary

Jul 20 17:21:09 feux3-citadel_abscom-linux webcit[981]: HTTP: 200 [0.001141] GET /do_template?template=who_iconbar

Jul 20 17:21:21 feux3-citadel_abscom-linux journal: Suppressed 527 messages from /system.slice/citadel.service

Jul 20 17:21:25 feux3-citadel_abscom-linux citserver[684]: msgbase: message 0 appears to be corrupted

Jul 20 17:21:25 feux3-citadel_abscom-linux webcit[981]: HTTP: 200 [0.001079] GET dotskip?room=Tasks

Jul 20 17:21:25 feux3-citadel_abscom-linux webcit[981]: HTTP: 200 [0.000136] GET /do_template?template=iconbar_user

Jul 20 17:21:25 feux3-citadel_abscom-linux webcit[981]: HTTP: 200 [0.001773] GET /do_template?template=who_iconbar

Jul 20 17:21:25 feux3-citadel_abscom-linux webcit[981]: HTTP: 200 [0.001586] GET /json_roomflr?SortBy=byfloorroom?SortOrder=1

Jul 20 17:21:29 feux3-citadel_abscom-linux citserver[684]: msgbase: message 0 appears to be corrupted

Jul 20 17:21:29 feux3-citadel_abscom-linux webcit[981]: HTTP: 200 [0.001537] GET dotskip?room=Calendar

Jul 20 17:21:29 feux3-citadel_abscom-linux webcit[981]: HTTP: 200 [0.000232] GET /do_template?template=iconbar_user

Jul 20 17:21:29 feux3-citadel_abscom-linux webcit[981]: HTTP: 200 [0.000642] GET /json_roomflr?SortBy=byfloorroom?SortOrder=1

Jul 20 17:21:29 feux3-citadel_abscom-linux webcit[981]: HTTP: 200 [0.001237] GET /do_template?template=who_iconbar

Jul 20 17:21:34 feux3-citadel_abscom-linux webcit[981]: HTTP: 200 [0.000448] GET dotskip?room=Calendar

Jul 20 17:21:35 feux3-citadel_abscom-linux webcit[981]: HTTP: 200 [0.000144] GET /do_template?template=iconbar_user

Jul 20 17:21:35 feux3-citadel_abscom-linux webcit[981]: HTTP: 200 [0.001069] GET /do_template?template=who_iconbar

Jul 20 17:21:35 feux3-citadel_abscom-linux webcit[981]: HTTP: 200 [0.001335] GET /json_roomflr?SortBy=byfloorroom?SortOrder=1

Jul 20 17:21:52 feux3-citadel_abscom-linux journal: Suppressed 546 messages from /system.slice/citadel.service

Jul 20 17:22:05 feux3-citadel_abscom-linux webcit[981]: HTTP: 200 [0.001048] GET /do_template?template=who_iconbar

 
regards,
Christian COMMARMOND
 


[#] Thu Jul 20 2017 12:03:16 EDT from IGnatius T Foobar @ Uncensored

Subject: Re: DB errror after migration

[Reply] [ReplyQuoted] [Headers] [Print]

I'm needing to migrate my citadel instance from one server to
another.

performed an easy-install on the target system

used ./ctdlmigrate   to bring all the data across

If the source and target systems are the same architecture (such as 64-bit Intel) you're probably better off just shutting down citserver on the source system and copying the files over.

[#] Thu Jul 20 2017 14:46:27 EDT from wylekyote @ Uncensored

Subject: Re: DB errror after migration

[Reply] [ReplyQuoted] [Headers] [Print]

They are the same architecture,  but I wanted to get away from the debian  .rpm install and into the easy-install which is many many revisions newer



[#] Thu Jul 20 2017 19:46:05 EDT from IGnatius T Foobar @ Uncensored

Subject: Re: DB errror after migration

[Reply] [ReplyQuoted] [Headers] [Print]

Right. You can still do it, but you'll have to go through a bunch of places to get it all. Look at this web page

 http://www.citadel.org/doku.php/documentation:file_layout

It will tell you where the packages keep all the data files. You'll neeed to scrape those all up and get them over to /usr/local/citadel on the target system.

This proliferation of files is greatly reduced in recent versions of Citadel server. Our aim is to have 100% of everything directly in the database in the not too distant future.

[#] Fri Jul 21 2017 12:21:37 EDT from wylekyote @ Uncensored

Subject: Re: DB errror after migration

[Reply] [ReplyQuoted] [Headers] [Print]

yeah I get that ..  I still need to "upgrade" from ** Citadel server engine v8.24 (build 5644ab7) ***

 

I can copy the tree over, but the db schema will have changed ..  is it best to just db_dump -h all that and db_load it on the other side?

 

Also .. there's still the issue of the segfault on login and the apparent db corruption afterwords which started this thread.

 

 

Thu Jul 20 2017 19:46:05 EDT from IGnatius T Foobar @ Uncensored Subject: Re: DB errror after migration
Right. You can still do it, but you'll have to go through a bunch of places to get it all. Look at this web page

 http://www.citadel.org/doku.php/documentation:file_layout

It will tell you where the packages keep all the data files. You'll neeed to scrape those all up and get them over to /usr/local/citadel on the target system.

This proliferation of files is greatly reduced in recent versions of Citadel server. Our aim is to have 100% of everything directly in the database in the not too distant future.

 



[#] Sat Jul 22 2017 20:58:53 EDT from MichaelMcDonald @ Uncensored

Subject: Removing Contacts From roomlist

[Reply] [ReplyQuoted] [Headers] [Print]

Hi,

IS it possible to remove contact, notes, etc from roomlist as an email can be moved into one of these and then it appears unrecoverable?

 

Thanks,

 

Michael McDonald -Australia



[#] Sun Jul 23 2017 05:40:08 EDT from jiten @ Uncensored

Subject: HOW TO DISABLE SELF SERVICE USER REGISTRATION

[Reply] [ReplyQuoted] [Headers] [Print]

How do I disable self service user registration I dont want

anyone to register to my server without our permission

Thanks



Go to page: First ... 19 20 21 22 [23] 24 25 26 27 ... Last