Language:
switch to room list switch to menu My folders
Go to page: First ... 11 12 13 14 [15] 16 17 18 19 ... Last
[#] Wed Apr 26 2017 18:34:05 EDT from kinetix @ Uncensored

Subject: Re: RSS over HTTPS

[Reply] [ReplyQuoted] [Headers] [Print]

Interesting... as a follow-up to the RSS https issue, I updated to libcit/citadel 911 and going back to the plain https URI without the port number in there, it just did a pull of the RSS feed successfully.

Thanks!



[#] Wed Apr 26 2017 18:40:08 EDT from kinetix @ Uncensored

Subject: citserver isn't paying attention to -x flag

[Reply] [ReplyQuoted] [Headers] [Print]

Running libcit/citserver 911 now.

citserver is run as: /home/citadel/citserver -d -h/home/citadel -x0 -llocal0

I've gone down to -x0 trying to get the logging to stop seeming like a full debug log, but no matter the setting it's spewing out every event that seems to happen on the system.  I would be happy to post any parts of the logs, if necessary.



[#] Wed Apr 26 2017 18:50:43 EDT from kinetix @ Uncensored

Subject: Re: citserver isn't paying attention to -x flag

[Reply] [ReplyQuoted] [Headers] [Print]

On a related note, webcit does syslogging but there's no way to configure the verbosity or facility?  Is it worthwhile just to use -t instead?



[#] Thu Apr 27 2017 00:23:11 EDT from AdeV @ Uncensored

Subject: Re: Problem with TDAP

[Reply] [ReplyQuoted] [Headers] [Print]

 

Wed Apr 26 2017 14:28:55 EDT from IGnatius T Foobar @ Uncensored Subject: Re: Problem with TDAP
AdeV: do you have your site configuration set to "Automatically delete committed database logs" ? If not, please turn on that option.

If it's the logs that are piling up, you will find them as /usr/local/citadel/data/log.********** and they will be 10 MB each. Be careful; you can't just delete them. If you have Citadel configured to delete them automatically, they will be deleted when they are no longer needed, in which case there should never be more than one or two of them on disk at any given time.

If it's not the logs that are piling up, please do a "ls -lh /usr/local/citadel/data" and we can see which file is the problem.

Hi,

I can confirm I do have the automatically delete committed database logs setting switched on. During normal operation, I only ever see one or two log files.

I discovered the hard way about not deleting the log files! Fortunately I had just taken a backup....

 

When TDAP starts, if I have set the message expire policy on the Aide folder, it is the log files which start piling up, eventually filling the hard disk completely. The cdb.0? files don't change size during the whole operation. After the disk space flatlines, running db_recover then db_archive piped into rm to get rid of the log files returns everything to the state prior to TDAP running. My guess is, TDAP starts a transaction, but either some minor corruption in my DB causes it to go round and round in circles, or it just plain can't handle 1.25 million messages in a room...

Cheers,

Ade. (not Aide...)



[#] Thu Apr 27 2017 05:05:49 EDT from vnaster @ Uncensored

Subject: Filtering Incoming remote POP3 emails

[Reply] [ReplyQuoted] [Headers] [Print]

Continuing my previous posts, any idea how to filter incoming remote POP3 messages in Citadel?

If not supported, maybe there is a sample script for moving emails that i could try adapting?

Thanks,

Vnaster

 

 



[#] Thu Apr 27 2017 11:06:03 EDT from "Dirk Heinrichs" <dirk.heinrichs@altum.de> to room_citadel_support@uncensored.citadel.org

Subject: Re: [Citadel Support] Re: Can't resolve admin account from AD

[Reply] [ReplyQuoted] [Headers] [Print]

Am 05.04.2017 um 19:44 schrieb Dirk Heinrichs:

... which leads to another compilation problem later, in the citadel
package. The problem here is that Stretch already ships OpenSSL 1.1,
which introduces API incompatible changes. So, in order to compile
Citadel on Stretch, it has to be adapted to OpenSSL 1.1 first.

Stretch is already in freeze phase. Is there anythin being done on that
front?

Thanks...

Dirk

--
Dirk Heinrichs <dirk.heinrichs@altum.de>
GPG Public Key: D01B367761B0F7CE6E6D81AAD5A2E54246986015
Sichere Internetkommunikation: http://www.retroshare.org
Privacy Handbuch: https://www.privacy-handbuch.de

signature.asc (application/pgp-signature, 849 bytes) [ View | Download ]
[#] Thu Apr 27 2017 17:41:37 EDT from kinetix @ Uncensored

Subject: webcit language selection bug

[Reply] [ReplyQuoted] [Headers] [Print]

Anyone noticed that there's some odd issues with the Language selector in webcit?  If you only have 1 language available, you see two selections for it in the drop-down.  If you have 2 available, there's still two "en_US"'s, and you might get a weird blank page by selecting one of them.  Or, you may get bounced to another room/URI you weren't expecting.

Something pretty funky going on there.



[#] Thu Apr 27 2017 17:50:05 EDT from bennabiy @ Uncensored

Subject: Re: webcit language selection bug

[Reply] [ReplyQuoted] [Headers] [Print]

I could be wrong, but I think one entry is showing you what you already have, and the other just is a choice for it, which once selected redirects you to your _BASEROOM_ set per user...

Thu Apr 27 2017 05:41:37 PM EDT from kinetix @ Uncensored Subject: webcit language selection bug

Anyone noticed that there's some odd issues with the Language selector in webcit?  If you only have 1 language available, you see two selections for it in the drop-down.  If you have 2 available, there's still two "en_US"'s, and you might get a weird blank page by selecting one of them.  Or, you may get bounced to another room/URI you weren't expecting.

Something pretty funky going on there.



 



[#] Thu Apr 27 2017 18:06:02 EDT from kinetix @ Uncensored

Subject: Enable "Reply-To:" on regular room messages?

[Reply] [ReplyQuoted] [Headers] [Print]

Howdy... is this a wacky idea?  If one wants to utilize citadel from a mobile device, it seems an IMAP client may be the way to go.  But, it's not so optimal when wanting to reply to messages in rooms when the system is treated like a forum/BBS.  If we could set a Reply-To: in a room for the messages contained in it (even as simply as an option "Set message Reply-To: to this room's email address?", then it would make participating from an IMAP client a little more bearable.

Would this break anything, or is it already implemented in another fashion that I haven't seen yet?

 



[#] Thu Apr 27 2017 18:38:47 EDT from s3cr3to @ Uncensored

Subject: IGnatius T Foobar - Subjects on mail list are ...

[Reply] [ReplyQuoted] [Headers] [Print]

Here (http://uncensored.citadel.org/) the Subjects for all messages shows correctly.

But after the last message received in this room on:

09/04/17 15:31 with subject "[Citadel Support] Re: Configuring Citadel as Microsoft Exchange Public folders alternative"

all new messages from the list only shows "[Citadel Support]" on my Thunderbird.

IGT, can you fix it?, pretty please :)

Regards



[#] Thu Apr 27 2017 20:58:11 EDT from bennabiy @ Uncensored

Subject: Re: Enable "Reply-To:" on regular room messages?

[Reply] [ReplyQuoted] [Headers] [Print]

There is this, but I think with the configs in the database now, this might need to be revised (but in general, support is there...)

 

http://www.citadel.org/doku.php/faq:everydayuse:how_do_i_beautify_the_mailname_of_a_public_room

 

Thu Apr 27 2017 06:06:02 PM EDT from kinetix @ Uncensored Subject: Enable "Reply-To:" on regular room messages?

Howdy... is this a wacky idea?  If one wants to utilize citadel from a mobile device, it seems an IMAP client may be the way to go.  But, it's not so optimal when wanting to reply to messages in rooms when the system is treated like a forum/BBS.  If we could set a Reply-To: in a room for the messages contained in it (even as simply as an option "Set message Reply-To: to this room's email address?", then it would make participating from an IMAP client a little more bearable.

Would this break anything, or is it already implemented in another fashion that I haven't seen yet?

 



 



[#] Fri Apr 28 2017 01:24:34 EDT from kinetix @ Uncensored

Subject: Re: Enable "Reply-To:" on regular room messages?

[Reply] [ReplyQuoted] [Headers] [Print]

Yes, I've run across all the documentation and this isn't what I'm trying to achieve.  I'm looking to be able to hit Reply to a room message in an email client and have that reply automatically go to the room, not to the From: address.



[#] Fri Apr 28 2017 09:12:48 EDT from bennabiy @ Uncensored

Subject: Re: Enable "Reply-To:" on regular room messages?

[Reply] [ReplyQuoted] [Headers] [Print]

I understand what you are saying now. I seem to recall a discussion about it at one point, but I do not recall if it was because it was possible, or if it was just being discussed whether to implement it. I will mention it to IG, as it would be a helpful thing to be able to set (although some instances, you want to be able to send a reply just to the person who posted... so it goes both ways).

Fri Apr 28 2017 01:24:34 AM EDT from kinetix @ Uncensored Subject: Re: Enable "Reply-To:" on regular room messages?

Yes, I've run across all the documentation and this isn't what I'm trying to achieve.  I'm looking to be able to hit Reply to a room message in an email client and have that reply automatically go to the room, not to the From: address.



 



[#] Fri Apr 28 2017 12:33:46 EDT from "Dirk Heinrichs" <dirk.heinrichs@altum.de> to room_citadel_support@uncensored.citadel.org

Subject: Re: IGnatius T Foobar - Subjects on mail list are ...

[Reply] [ReplyQuoted] [Headers] [Print]

Am 28.04.2017 um 00:38 schrieb s3cr3to:

Here (http://uncensored.citadel.org/) the Subjects for all messages shows correctly.

But after the last message received in this room on:

09/04/17 15:31 with subject "[Citadel Support] Re: Configuring Citadel as Microsoft Exchange Public folders alternative"

all new messages from the list only shows "[Citadel Support]" on my Thunderbird.


Same here, but only if subscribed to the mailing list. If I also connect thunderbird to uncensored directly, messages show up fine in the room's folder. I also see some more issues with the mailing list:

  • Message bodies are modified, adding strange characters (see attached screenshots) in addidtion to adding header and footer (which IMHO also shouldn't happen, as it breakes message signing)
  • Some messages are missing completely, like the one i'm replying to here.
Bye...

    Dirk
-- 
Dirk Heinrichs <dirk.heinrichs@altum.de>
GPG Public Key: D01B367761B0F7CE6E6D81AAD5A2E54246986015
Sichere Internetkommunikation: http://www.retroshare.org
Privacy Handbuch: https://www.privacy-handbuch.de


from_room.png (image/png, 36908 bytes) [ View | Download ]
from_list.png (image/png, 47532 bytes) [ View | Download ]
signature.asc (application/pgp-signature, 849 bytes) [ View | Download ]
[#] Sun Apr 30 2017 03:52:57 EDT from bjerke @ Uncensored

Subject: Import users

[Reply] [ReplyQuoted] [Headers] [Print]

Is it possible to import/syncronise from an external database, e.g. mysql?

flem



[#] Sun Apr 30 2017 22:21:25 EDT from bennabiy @ Uncensored

Subject: Re: Import users

[Reply] [ReplyQuoted] [Headers] [Print]

How good are you at scripting, and how much time do you have :)

 

 

Sun Apr 30 2017 03:52:57 AM EDT from bjerke @ Uncensored Subject: Import users

Is it possible to import/syncronise from an external database, e.g. mysql?

flem



 



[#] Mon May 01 2017 01:12:12 EDT from bjerke @ Uncensored

Subject: Re: Import users

[Reply] [ReplyQuoted] [Headers] [Print]

I do scripting, and I have some time. The problem is that we have our members in mysql and need to import their name and mail adress if we should use citadel. We should be able to delete members automatically as well. I have looked at using cadaver and groupdav, but though cadaver tell me that put is a success, I see no object in the cadaver dav-interface. Is this a possible/manageable way to go at all? Or should we insert members directly in the Citadel database? Or should we try through ldap? Or should we hack into the user database through the admin-webinterface? Or is there any alternative?

 

Thank you for helping.

Sun Apr 30 2017 10:21:25 PM EDT from bennabiy @ Uncensored Subject: Re: Import users

How good are you at scripting, and how much time do you have :)

 

 

Sun Apr 30 2017 03:52:57 AM EDT from bjerke @ Uncensored Subject: Import users

Is it possible to import/syncronise from an external database, e.g. mysql?

flem



 



 



[#] Mon May 01 2017 09:51:50 EDT from schaap23 @ Uncensored

Subject: Re: installation failed database too old?

[Reply] [ReplyQuoted] [Headers] [Print]

I know it's a very late reply, but I also ran into this issue and wanted to tell you guys how I worked around it.

 

When performing a clean easyinstall on Ubuntu 16.04.2 LTS, I received the same error:

configure: error: c-ares library defective or too old

 

It's as if the easyinstall script does not download and install c-ares. I worked around the issue by downloading c-ares from the official website (https://c-ares.haxx.se/) and installing it manually.

 

wget https://c-ares.haxx.se/download/c-ares-1.12.0.tar.gz

tar -xvf c-ares-1.12.0.tar.gz

cd <where you extracted it>

./configure

make

sudo make install

 

After this I also had to run ¨sudo ldconfig" to update the shared libraries cache in ubuntu. Otherwise citadel will fail to start afterwards with the error that it cannot locate the c-ares library.

Now I was able to run the easyinstall script successfully. It could successfully build citadel.



[#] Mon May 01 2017 09:57:13 EDT from Freakdog @ Dog Pound BBS II

Subject: Re: installation failed database too old?

[Reply] [ReplyQuoted] [Headers] [Print]

It's as if the easyinstall script does not download and install c-ares.
I
worked around the issue by downloading c-ares from the official website

(https://c-ares.haxx.se/) and installing it manually.

That's correct...the easyinstall process has never installed the c-ares packages for you.

I know that RedHat/CentOS has packages available. I'd be very surprised if Debian/Ubuntu didn't also have packages available, as well.

[#] Mon May 01 2017 11:13:44 EDT from schaap23 @ Uncensored

Subject: Re: installation failed database too old?

[Reply] [ReplyQuoted] [Headers] [Print]

 

Mon May 01 2017 09:57:13 EDT from Freakdog @ Dog Pound BBS II Subject: Re: installation failed database too old?
It's as if the easyinstall script does not download and install c-ares.
I
worked around the issue by downloading c-ares from the official website

(https://c-ares.haxx.se/) and installing it manually.

That's correct...the easyinstall process has never installed the c-ares packages for you.

I know that RedHat/CentOS has packages available. I'd be very surprised if Debian/Ubuntu didn't also have packages available, as well.

You are correct. Ubuntu also have packages available (libc-ares-dev).

 

I quote the documentation on the website http://citadel.org/doku.php/installation:source:

"The Citadel system relies on the following libraries in order to provide its full set of functionality. (If you are using pre-built packages, or the Easy Install system, these libraries will be brought in for you automatically.)

....

c-ARES for asynchronous nameserver resolution (> v1.73)

....

"

According to the website the c-ares library will be brought in via easyinstall.

If the easyinstall script does not install c-ares by design, then perhaps the documentation on the website must be updated to reflect this.



Go to page: First ... 11 12 13 14 [15] 16 17 18 19 ... Last