Language:
switch to room list switch to menu My folders
Go to page: 1 3 4 5 6 [7] 8 9 10 11 ... Last
[#] Sun Feb 26 2017 10:16:44 EST from bennabiy @ Uncensored

[Reply] [ReplyQuoted] [Headers] [Print]

It seems like it is helping. The server has not crashed, but I see about 9 SMTP connections established out of 126 connections. 

Fri Feb 24 2017 09:45:24 PM EST from IGnatius T Foobar @ Uncensored

 

Do you think that would cause it? Running out of workers, and then the connections piling up without anyone to talk to? I still do not know why there are that many SMTPS connecitons, my userbase is only about 275.

That could definitely be it ... stale connections piling up faster than the server can time them out.   And yes 15 minutes is the default timeout, but it probably doesn't need to be anywhere near that long, because SMTP connections should never go idle, and IMAP connections don't go idle as long as the client keeps polling for mail or sending keepalives or whatever.

Run it for a while with the lower timeout and let's see!

 



 



[#] Mon Feb 27 2017 09:28:11 EST from rwb0027 @ Uncensored

Subject: Re: debconf install automation, ports can't be binded

[Reply] [ReplyQuoted] [Headers] [Print]

 

 

If you want to run an automated setup you might want to just skip debconf altogether and just write your inputs into the setup program directly.

I'd be happy to try that, but not sure how.  I'm running Apt-Get to install Citadel, do you mean using a parameter in the install command, or some other method of simulating the user input in the installer? Maybe you have a link that describes the method you are proposing?



[#] Mon Feb 27 2017 22:28:27 EST from IGnatius T Foobar @ Uncensored

Subject: Re: debconf install automation, ports can't be binded

[Reply] [ReplyQuoted] [Headers] [Print]

I'd be happy to try that, but not sure how.  I'm running Apt-Get to
install Citadel, do you mean using a parameter in the install
command, or some other method of simulating the user input in the
installer? Maybe you have a link that describes the method you are
proposing?

Look at what the postinst script is doing, and do that :)

Basically you're feeding inputs into the "setup" program that is included with the Citadel server. postinst runs it in a
"batch" mode, and you can too.

[#] Tue Feb 28 2017 04:07:47 EST from Cit-Main @ Uncensored

Subject: Improve Performance

[Reply] [ReplyQuoted] [Headers] [Print]

Hey folks,

do you have some hints to improve  the performance of the Citadel Server. It takes 2-4 minutes to send an Email with the webcit or with thunderbird.

 



[#] Tue Feb 28 2017 09:31:55 EST from bennabiy @ Uncensored

Subject: Re: Improve Performance

[Reply] [ReplyQuoted] [Headers] [Print]

It sounds like you might have some SpamAssassin scripts or RBL filters etc which are enabled on outgoing messages. 

Tue Feb 28 2017 04:07:47 AM EST from Cit-Main @ Uncensored Subject: Improve Performance

Hey folks,

do you have some hints to improve  the performance of the Citadel Server. It takes 2-4 minutes to send an Email with the webcit or with thunderbird.

 



 



[#] Fri Mar 03 2017 11:30:04 EST from bennabiy @ Uncensored

Subject: Address Books

[Reply] [ReplyQuoted] [Headers] [Print]

I have tried creating address books, or viewing the Global Address Book, and something is borked.

I see a whole lot of names with commas above where the addresses should be nicely formatted, and a bunch of tabs which say "(no - (no" on them...

 

 



[#] Fri Mar 03 2017 12:14:54 EST from bennabiy @ Uncensored

Subject: Sent Items room

[Reply] [ReplyQuoted] [Headers] [Print]

I noticed that the sent Items room does not display who the message was sent to at a glance. I get many complaints about it. Can it be included for that room?



[#] Sun Mar 05 2017 15:29:26 EST from bennabiy @ Uncensored

Subject: Force delete of a room

[Reply] [ReplyQuoted] [Headers] [Print]

As the admin / Aide user, how can I delete a folder / room from a personal mailbox of a user.

 

Also, how do I globally set what the _BASEROOM_ points to so all users go to the same starting room?



[#] Sun Mar 05 2017 18:04:58 EST from IGnatius T Foobar @ Uncensored

Subject: Re: Address Books

[Reply] [ReplyQuoted] [Headers] [Print]

Not sure where that crept in, but I'm fixing it now.  Stay tuned.

Fri Mar 03 2017 11:30:04 AM EST from bennabiy @ Uncensored Subject: Address Books

I have tried creating address books, or viewing the Global Address Book, and something is borked.

I see a whole lot of names with commas above where the addresses should be nicely formatted, and a bunch of tabs which say "(no - (no" on them...

 



[#] Sun Mar 05 2017 18:05:48 EST from IGnatius T Foobar @ Uncensored

Subject: Re: Sent Items room

[Reply] [ReplyQuoted] [Headers] [Print]

This is something we'll fix in webcit-ng, unless there's an urgent need?

Fri Mar 03 2017 12:14:54 PM EST from bennabiy @ Uncensored Subject: Sent Items room

I noticed that the sent Items room does not display who the message was sent to at a glance. I get many complaints about it. Can it be included for that room?

 



[#] Sun Mar 05 2017 18:07:30 EST from joe-liberty @ Uncensored

Subject: no more webcit

[Reply] [ReplyQuoted] [Headers] [Print]

I changed an option to -1 in webcit from 5222 to remove service and I can no longer log into webcit. Any help is greatly appreciated. Citserver is still running fine! Thank you!



[#] Sun Mar 05 2017 18:10:40 EST from IGnatius T Foobar @ Uncensored

Subject: Re: Force delete of a room

[Reply] [ReplyQuoted] [Headers] [Print]

Also, how do I globally set what the _BASEROOM_ points to so all users go to the same starting room?

There are two ways to do this.

One is to simply rename the "Lobby".  That's the "true" _BASEROOM_ and users start there by default.

If all you care about is WebCit, you can start webcit with the "-g" option to tell it to begin on a certain page.  For example, here on Uncensored it looks like this:

/usr/local/webcit/webcit -p80 -g '/dotgoto?room=welcome%20to%20uncensored!' uds /usr/local/citadel

That tells it to begin new sessions by jumping straight to the "Welcome to UNCENSORED!" room, which is just a wiki room where we have a set of static landing pages.



[#] Sun Mar 05 2017 22:01:17 EST from bennabiy @ Uncensored

Subject: Re: Address Books

[Reply] [ReplyQuoted] [Headers] [Print]

Great! Thank you. 

Sun Mar 05 2017 06:04:58 PM EST from IGnatius T Foobar @ Uncensored Subject: Re: Address Books

Not sure where that crept in, but I'm fixing it now.  Stay tuned.

Fri Mar 03 2017 11:30:04 AM EST from bennabiy @ Uncensored Subject: Address Books

I have tried creating address books, or viewing the Global Address Book, and something is borked.

I see a whole lot of names with commas above where the addresses should be nicely formatted, and a bunch of tabs which say "(no - (no" on them...

 



 



[#] Sun Mar 05 2017 22:01:44 EST from bennabiy @ Uncensored

Subject: Re: Sent Items room

[Reply] [ReplyQuoted] [Headers] [Print]

Not urgent, but it is something I get asked about weekly. 

Sun Mar 05 2017 06:05:48 PM EST from IGnatius T Foobar @ Uncensored Subject: Re: Sent Items room

This is something we'll fix in webcit-ng, unless there's an urgent need?

Fri Mar 03 2017 12:14:54 PM EST from bennabiy @ Uncensored Subject: Sent Items room

I noticed that the sent Items room does not display who the message was sent to at a glance. I get many complaints about it. Can it be included for that room?

 



 



[#] Sun Mar 05 2017 22:04:08 EST from bennabiy @ Uncensored

Subject: Re: Force delete of a room

[Reply] [ReplyQuoted] [Headers] [Print]

I tried the renaming (which worked on previous versions) but now I have different users which all have a different landing page, and had Lobby being recreated because of someones mail client, and so the room which used to be Lobby, but got renamed all of a sudden had a competing Lobby. 

 

It is all messed up. I have one room which I cannot delete (even as the Aide) in a user mailbox, and I have random dissappearing Lobby acts.

Sun Mar 05 2017 06:10:40 PM EST from IGnatius T Foobar @ Uncensored Subject: Re: Force delete of a room

Also, how do I globally set what the _BASEROOM_ points to so all users go to the same starting room?

There are two ways to do this.

One is to simply rename the "Lobby".  That's the "true" _BASEROOM_ and users start there by default.

If all you care about is WebCit, you can start webcit with the "-g" option to tell it to begin on a certain page.  For example, here on Uncensored it looks like this:

/usr/local/webcit/webcit -p80 -g '/dotgoto?room=welcome%20to%20uncensored!' uds /usr/local/citadel

That tells it to begin new sessions by jumping straight to the "Welcome to UNCENSORED!" room, which is just a wiki room where we have a set of static landing pages.



 



[#] Tue Mar 07 2017 13:39:41 EST from nonservator @ Uncensored

Subject: NNTP

[Reply] [ReplyQuoted] [Headers] [Print]

A year or two back, I saw that NNTP support was no longer in Citadel, though supposedly this was just temporary. Is this back in, and if not, is there anything a non-coder can do to help get it back? (Like Urbit is becoming the easiest way to set up a web server, Citadel was always the easiest way to set up a news server.)

 

(As an 80's BBSer, I still prefer the traditional client. This web cancer is perplexing.)



[#] Tue Mar 07 2017 17:35:40 EST from IGnatius T Foobar @ Uncensored

Subject: Re: Address Books

[Reply] [ReplyQuoted] [Headers] [Print]

Not sure where that crept in, but I'm fixing it now.  Stay tuned.

Ok, I've got the address book view fixed. A bug crept in when that screen was templatized (which makes me wonder how long it's been like that). I found another problem in that view where if you make changes to an address book entry it saves it in the wrong place ... as soon as I fix *that* issue I'll push the fixes out to Easy Install and you can grab them.

[#] Tue Mar 07 2017 17:38:19 EST from IGnatius T Foobar @ Uncensored

Subject: Re: NNTP

[Reply] [ReplyQuoted] [Headers] [Print]

A year or two back, I saw that NNTP support was no longer in Citadel,
though supposedly this was just temporary. Is this back in, and if
not, is there anything a non-coder can do to help get it back? (Like
Urbit is becoming the easiest way to set up a web server, Citadel was
always the easiest way to set up a news server.)

Are you sure it was this variant of Citadel? (We're pretty much the *only* variant of Citadel available these days, but there were others in the past.)

In any case, the NNTP server was never "officially" released, but it's still there and it works. However, it is read-only.

[#] Tue Mar 07 2017 21:06:38 EST from nonservator @ Uncensored

Subject: Re: NNTP

[Reply] [ReplyQuoted] [Headers] [Print]

Pretty sure it was this version, though never underestimate the possibility of early onset Alzheimer's. Read only is closer than I expected, which is a plus. Any notions on how much effort posting would require? (Not that I expect there's a lot of demand, but we're already a niche of a niche of a niche, etc.)

[#] Wed Mar 08 2017 10:16:39 EST from fflax @ Uncensored

Subject: gmail account mail retrival

[Reply] [ReplyQuoted] [Headers] [Print]

Hi there,

iam a newbie with citadel and hopefully right here

i setup my Citadel Suite on a raspberry and now want to retrieve my email from different mail accounts currently starting with gmail

so my steps (what i ggogled how to do) go to remote retrieval and add

remote host : pop.gmail.com

username : mygmailname

password : my gmailpassword

keep message on server yep

intervall : 30

i would expected to enter somewhere a port and other TLS or whatever but dont know where.

And in the end it doesnt work.

Can anybody please help me how to configure remote mail retrieval ?

 

Thanks !



Go to page: 1 3 4 5 6 [7] 8 9 10 11 ... Last