Language:
switch to room list switch to menu My folders
Go to page: [1] 2 3 4 5 ... Last
↑↑↑ Old messages ↑↑↑            ↓↓↓ New messages ↓↓↓
[#] Tue Aug 20 2013 17:26:45 EDT from Kingkoopa @ Uncensored

Subject: ESXi 5.1 install

[Reply] [ReplyQuoted] [Headers] [Print]

I see that there is a download for a ready-to-go setup for ESXi 4.1, but will it work with 5.1 as well, or are there things you have to change to get it to install correctly.



[#] Tue Aug 20 2013 17:53:23 EDT from Kingkoopa @ Uncensored

Subject: ESXi 5.1 install

[Reply] [ReplyQuoted] [Headers] [Print]

I see that there is a download for a ready-to-go setup for ESXi 4.1, but will it work with 5.1 as well, or are there things you have to change to get it to install correctly.



[#] Tue Aug 20 2013 18:04:24 EDT from IGnatius T Foobar @ Uncensored

Subject: Re: ESXi 5.1 install

[Reply] [ReplyQuoted] [Headers] [Print]

It'll work just fine on ESXi 5.1, no problem.

[#] Wed Aug 21 2013 00:39:01 EDT from Fadli Saputra @ Uncensored

Subject: Citadel mailserver can't send email

[Reply] [ReplyQuoted] [Headers] [Print]

Dear Master,

please help me, about the citadel mail server can not send mail to the Internet.

error status message like this :

A message you sent could not be delivered to some or all of its recipients.
The following addresses were undeliverable:

fadli21saputra@gmail.com: 5.7.1 our Bulk Email Senders Guidelines. tl4si5029968pac.340 - gsmtp

 

Please help me god!! 



[#] Wed Aug 21 2013 07:54:53 EDT from Freakdog @ Dog Pound BBS II

Subject: Re: Citadel mailserver can't send email

[Reply] [ReplyQuoted] [Headers] [Print]

 

Wed Aug 21 2013 12:39:01 AM EDT from Fadli Saputra @ Uncensored Subject: Citadel mailserver can't send email

Dear Master,

please help me, about the citadel mail server can not send mail to the Internet.

error status message like this :

A message you sent could not be delivered to some or all of its recipients.
The following addresses were undeliverable:

fadli21saputra@gmail.com: 5.7.1 our Bulk Email Senders Guidelines. tl4si5029968pac.340 - gsmtp

 

Please help me god!!

I don't believe that G-d can intercede on your behalf, in this instance.

I can't be sure, without seeing a full log of the mail transaction, but it appears to me that your IP address is in someone's relay blacklist (RBL) or has been published by your ISP as a residential/dynamic IP address, and that you likely need to be relaying your email through your ISP's email server(s).



[#] Wed Aug 21 2013 13:06:13 EDT from Kingkoopa @ Uncensored

Subject: Missing Download Link

[Reply] [ReplyQuoted] [Headers] [Print]

Hey, I just tried to download the VMware package and it says that it can't be found on the server.

URL where the link is found: http://www.citadel.org/doku.php/installation:appliance

Direct download link that doesn't work: http://easyinstall.citadel.org/citadel-vmware-appliance-2012.zip



[#] Wed Aug 21 2013 14:09:04 EDT from tube shark @ Uncensored

Subject: Migration to new server

[Reply] [ReplyQuoted] [Headers] [Print]

I'm a novice at lixux so bear with me.  I am trying to migrate my existing citadel from a failing hard drive to a new pc / hardisk.  I have installed ubuntu 10.04 (same as old system) and citadel.  Both are working I can send and receive mail from both.  I have both machines on the same nework and have tried to use the ctdlmigrate command to migrate.  I 'm trying from the consol but it is telling me the file doesn't exists.  I know I'm not in the right place to execute the command.  Can anyone tell me the intial steps to be in the right location to execute the command.



[#] Wed Aug 21 2013 16:34:07 EDT from Freakdog @ Dog Pound BBS II

Subject: Network job interval being ignored?

[Reply] [ReplyQuoted] [Headers] [Print]

Something I've noticed, in the past, and am not sure if I've asked about it, yet:

Cascade is polling me every 60 seconds. I've got the "How often to run network jobs (in seconds):" value set to 3600, which should equate to 60 minutes.

Am I attempting to adjust the wrong setting, or is Citadel just ignoring the value and going with something hardcoded, instead?



[#] Wed Aug 21 2013 16:40:03 EDT from Freakdog @ Dog Pound BBS II

Subject: Re: Network job interval being ignored?

[Reply] [ReplyQuoted] [Headers] [Print]

Something I've noticed, in the past, and am not sure if I've asked
about it, yet:

Cascade is polling me every 60 seconds. I've got the "How often to
run network jobs (in seconds):" value set to 3600, which should
equate to 60 minutes.

Am I attempting to adjust the wrong setting, or is Citadel just
ignoring the value and going with something hardcoded, instead?

Same happens on DP2, though the network job setting is set to 900 (15 minutes).

[#] Thu Aug 22 2013 00:30:33 EDT from pengrus @ Uncensored

Subject: Owncloud with Citadel

[Reply] [ReplyQuoted] [Headers] [Print]

I apologize if this has been answered before somwhere, I truly truly googled the hell out of this, and have tried every solution I found to no avail.

I am trying to run citadel alongside nginx (specifcally owncloud).

The root of my problem is not being able to proxy the nginx or the citadel properly, so that the subdomain mail.mydomain.com directs to citadel.  I have tried multiple times in different ways to use the "how do I run citadel alongside apache/nginx/lighttpd" config file given on the documentation page, but I am not having any luck.

I have also tried several different configurations I could find in tutorials or whathaveyou on the interwebs, but again, no luck.

I have the nginx listening on 80 and forcing ssl.  Citadel is listening on 2000 and 4343 for plain and SSL.  If I go to mydomain.com:4343, it works, but again, I'd prefer to have the subdomain functioning properly instead.

I hope I've provided enough information to help diagnose this issue, please let me know if not!

Thanks to all in advance!



[#] Thu Aug 22 2013 07:53:54 EDT from Freakdog @ Dog Pound BBS II

Subject: Re: Owncloud with Citadel

[Reply] [ReplyQuoted] [Headers] [Print]

 

Thu Aug 22 2013 12:30:33 AM EDT from pengrus @ Uncensored Subject: Owncloud with Citadel

I apologize if this has been answered before somwhere, I truly truly googled the hell out of this, and have tried every solution I found to no avail.

I am trying to run citadel alongside nginx (specifcally owncloud).

The root of my problem is not being able to proxy the nginx or the citadel properly, so that the subdomain mail.mydomain.com directs to citadel.  I have tried multiple times in different ways to use the "how do I run citadel alongside apache/nginx/lighttpd" config file given on the documentation page, but I am not having any luck.

I have also tried several different configurations I could find in tutorials or whathaveyou on the interwebs, but again, no luck.

I have the nginx listening on 80 and forcing ssl.  Citadel is listening on 2000 and 4343 for plain and SSL.  If I go to mydomain.com:4343, it works, but again, I'd prefer to have the subdomain functioning properly instead.

I hope I've provided enough information to help diagnose this issue, please let me know if not!

Thanks to all in advance!

http://www.citadel.org/doku.php/faq:installation:apacheproxy



[#] Thu Aug 22 2013 12:35:39 EDT from pengrus @ Uncensored

Subject: Re: Owncloud with Citadel

[Reply] [ReplyQuoted] [Headers] [Print]

 

Thu Aug 22 2013 07:53:54 EDT from Freakdog @ Dog Pound BBS II Subject: Re: Owncloud with Citadel

 

Thu Aug 22 2013 12:30:33 AM EDT from pengrus @ Uncensored Subject: Owncloud with Citadel

I apologize if this has been answered before somwhere, I truly truly googled the hell out of this, and have tried every solution I found to no avail.

I am trying to run citadel alongside nginx (specifcally owncloud).

The root of my problem is not being able to proxy the nginx or the citadel properly, so that the subdomain mail.mydomain.com directs to citadel.  I have tried multiple times in different ways to use the "how do I run citadel alongside apache/nginx/lighttpd" config file given on the documentation page, but I am not having any luck.

I have also tried several different configurations I could find in tutorials or whathaveyou on the interwebs, but again, no luck.

I have the nginx listening on 80 and forcing ssl.  Citadel is listening on 2000 and 4343 for plain and SSL.  If I go to mydomain.com:4343, it works, but again, I'd prefer to have the subdomain functioning properly instead.

I hope I've provided enough information to help diagnose this issue, please let me know if not!

Thanks to all in advance!

http://www.citadel.org/doku.php/faq:installation:apacheproxy



Thanks, but I did try that, as I mentioned above, and it does not appear to be working.



[#] Thu Aug 22 2013 15:31:19 EDT from Freakdog @ Dog Pound BBS II

Subject: Re: Owncloud with Citadel

[Reply] [ReplyQuoted] [Headers] [Print]

Thanks, but I did try that, as I mentioned above, and it does not
appear to be working.

My apologies...I misread your query."

Dumb question...on which IP is your webcit configured to listen? If you have nginx configured to forward to 127.0.0.1, but webcit doesn't listen on that IP, well, "you can't get there from here"...you might need to either configure webcit to listen on more than one IP, or configure nginx to proxy_pass to the IP on which webcit is listening.

[#] Thu Aug 22 2013 16:15:59 EDT from pengrus @ Uncensored

Subject: Re: Owncloud with Citadel

[Reply] [ReplyQuoted] [Headers] [Print]

 

Thu Aug 22 2013 15:31:19 EDT from Freakdog @ Dog Pound BBS II Subject: Re: Owncloud with Citadel
Thanks, but I did try that, as I mentioned above, and it does not
appear to be working.

My apologies...I misread your query."

Dumb question...on which IP is your webcit configured to listen? If you have nginx configured to forward to 127.0.0.1, but webcit doesn't listen on that IP, well, "you can't get there from here"...you might need to either configure webcit to listen on more than one IP, or configure nginx to proxy_pass to the IP on which webcit is listening.

No worries, thanks for answering!

 

IIRC, webcit is configured to listen on 0.0.0.0, while the nginx is proxy_pass-ing to 127.0.0.1.  I suppose I assumed that localhost would be the same for processing purposes as 0.0.0.0, but I didn't really give it much thought.  Man, I hope this is as simple a fix as that!

 

Thanks again, I'll reconfig ASAP and try again.



[#] Thu Aug 22 2013 22:55:41 EDT from Freakdog @ Dog Pound BBS II

Subject: Re: Owncloud with Citadel

[Reply] [ReplyQuoted] [Headers] [Print]

On 0.0.0.0, you're right, it should answer...and, because I don't see your configuration, your proxypass is set up to go to port 2000 on whichever IP you're using for webcit?

[#] Fri Aug 23 2013 13:06:14 EDT from cdysthe @ Uncensored

Subject: Question about mailing lists.

[Reply] [ReplyQuoted] [Headers] [Print]

Hi,

 

I have set up a couple of mailing lists without problems. Let's say one of them is called 'mylist'. However when I try to send mail (using Thunderbird) to the list at 'mylist@mydomain.com' it gets rejected with:

"An error occurred while sending mail. The mail server responded:  Invalid recipient: mylist. Please check the message recipient mylist@mydomain.com and try again."

What am I doing wrong since it's not possible to send to the list I am subscribed to?

Also I would like subscription to be moderated so that after users subscribe in webcit admin or aide has to approve the subscription before the user can post to the list. It would also work if I could set it so that only local users can subscribe and post.

Otherwise Citadel is working great as far as webcit and mail delivery is concerned.



[#] Fri Aug 23 2013 13:59:18 EDT from mxhess @ Uncensored

Subject: xmpp server to server port not available in webcit admin

[Reply] [ReplyQuoted] [Headers] [Print]

I'd like to be able to message others on IM services such as google chat but it would appear that I cannot enable the server to server port in the web interface. There is a box for the 5222 client port but there is no box below allowing me to enable/set the 5269 port for communication. Is there another way to enable this?

 

 



[#] Sun Aug 25 2013 23:25:56 EDT from snorkasaurus @ Uncensored

Subject: Name and email address in alias

[Reply] [ReplyQuoted] [Headers] [Print]

Greetings,

I would like to be able to setup different identities for my mailbox, each with its own name and email address. For example, if my real name is "Joe Schmoe" then I would like to create a Citadel user who has the name Joe Schmoe, and the email address joe.schmoe@mydomain.com.  Then I would like to create aliases for this user such as Joe with the email address joe@mydomain.com and Gary with the email address cheapskate@mydomain.com and Larry with the email address onebadeye@mydomain.com.  I have tried to set this up by creating a user and then providing additional email addresses in the "Internet e-mail aliases" box of the Citadel admin page.  Unfortunately when I send messages from an IMAP client such as SeaMonkey, the sender name and email address are changed to my display name and primary email address.  Is there a way to have "aliased messages" arrive at the recipient's mailbox with no reference to the primary account?

S.



[#] Mon Aug 26 2013 14:45:46 EDT from cdysthe @ Uncensored

Subject: Delete a floor in Webcit

[Reply] [ReplyQuoted] [Headers] [Print]

Hi,

 

I want to delete a floor in Webcit. But when I go Administration > Add, change, or delete floors I see the two floors I have, but no option to delete either one of them. Another strange thing is that it says that the floor I want to delete has 5 rooms. As far as I know it shouldn't have any. Anyhow, all I want is to delete it and every room it supposedly contains.



[#] Mon Aug 26 2013 18:55:27 EDT from the_mgt @ Uncensored

Subject: Re: Name and email address in alias

[Reply] [ReplyQuoted] [Headers] [Print]

Is there a way to have "aliased messages" arrive at the recipient's mailbox with no reference to the primary account?

If you request that this is done automagically, it is impossible at the moment, but at least an interesting feature. I had requested the same thing once.

What you can do is: Create an extra profile for each alias in your mail client, set it up accordingly, but use your real account name for auth purposes. Then it should work. Maybe you need to disable a check in Citadel somewhere, since this autocorrection is a feature, too. (So that noone can abuse your server to send mail as "Steve Ballmer" ceo@douchebag.com)

PS: Of course, setting an extra profile for each alias is a pita.



Go to page: [1] 2 3 4 5 ... Last